GitLocker: The Coding Marketplace

Description:

Adafruit Python DHT 1.4.0

Python library to read the DHT series of humidity and temperature sensors on a
Raspberry Pi or Beaglebone Black.
Designed specifically to work with the Adafruit DHT series sensors —->
https://www.adafruit.com/products/385
Currently the library is tested with Python 2.6, 2.7, 3.3 and 3.4. It should
work with Python greater than 3.4, too.

Installing
### Dependencies
For all platforms (Raspberry Pi and Beaglebone Black) make sure your system is
able to compile and download Python extensions with pip:
On Raspbian or Beaglebone Black’s Debian/Ubuntu image you can ensure your
system is ready by running one or two of the following sets of commands:
Python 2:
``sh sudo apt-get update sudo apt-get install python-pip sudo python -m pip install --upgrade pip setuptools wheel ``
Python 3:
``sh sudo apt-get update sudo apt-get install python3-pip sudo python3 -m pip install --upgrade pip setuptools wheel ``
### Install with pip
Use pip to install from PyPI.
Python 2:
`sh sudo pip install Adafruit_DHT `
Python 3:
`sh sudo pip3 install Adafruit_DHT `
### Compile and install from the repository
First download the library source code from the [GitHub releases
page](https://github.com/adafruit/Adafruit_Python_DHT/releases), unzipping the
archive, and execute:
Python 2:
`sh cd Adafruit_Python_DHT sudo python setup.py install `
Python 3:
`sh cd Adafruit_Python_DHT sudo python3 setup.py install `
You may also git clone the repository if you want to test an unreleased
version:
`sh git clone https://github.com/adafruit/Adafruit_Python_DHT.git `

Usage
See example of usage in the examples folder.

Author
Adafruit invests time and resources providing this open source code, please
support Adafruit and open-source hardware by purchasing products from Adafruit!
Written by Tony DiCola for Adafruit Industries.
MIT license, all text above must be included in any redistribution