GitLocker: The Coding Marketplace

Description:

airthings 3.2.0

airthings
airthings is a simple python package that contains methods to
communicate with Airthings[1] devices. The package utilizies bluepy[2]
for the communication between python and the devices. The package
features can be found below.

[1] https://airthings.com/
[2] https://github.com/IanHarvey/bluepy

Note: Some features are currently undocumented, and parts are
untested/not yet implemented.
Features

Autodiscover Airthings devices
Find and search for Airthings devices by using MAC addresses and/or
identifiers
Fetch sensor measurements from various Airthings models, see sensor
capability list below

Requirements
bluepy only supports Linux, and is therefore currently the only
supported operating system. I have only tested with the
Wave Plus Gen 1 (2930). Other device models should in theory work
fine, but they are untested or might be unimplemented.
System requirements:

- libglib2.0-dev

Installation
------------

The current stable version of airthings is available on pypi and can be
installed by running:

``pip install airthings``

Other sources:

- pypi: http://pypi.python.org/pypi/airthings/
- github: https://github.com/kotlarz/airthings/

Usage
-----

Examples can be found in the `examples <./examples>`__ directory.

Supported devices
-----------------

*Note: “Model number” are the first 4 digits of the Airthings device
serial number*

Wave Gen 1 (Model number: 2900)

On 1st Gen Wave, temperature and humidity are updated every time we read
the wave.
Sensor capabilities
^^^^^^^^^^^^^^^^^^^

Humidity (%rH)
Radon short term average (Bp/m3)
Radon long term average (Bq/m3)
Temperature (°C)

Wave Mini Gen 1 (Model number: 2920)

Sensor values are updated every 5 minutes.

.. _sensor-capabilities-1:

Sensor capabilities
^^^^^^^^^^^^^^^^^^^

- Humidity (%rH)
- Temperature (°C)
- VOC (ppb)

Wave Plus Gen 1 (Model number: 2930)

Except for the radon measurements, the Wave Plus updates its current
sensor values once every 5 minutes. Radon measurements are updated once
every hour.
.. _sensor-capabilities-2:
Sensor capabilities
^^^^^^^^^^^^^^^^^^^

Humidity (%rH)
Radon short term average (Bp/m3)
Radon long term average (Bq/m3)
Temperature (°C)
Atmospheric pressure (hPa)
CO2 (ppm)
VOC (ppb)

Wave Gen 2 (Model number: 2950)

On 2nd Gen Wave, temperature and humidity are updated every 5 minutes.
On both devices, radon measurements are updated once every hour.

.. _sensor-capabilities-3:

Sensor capabilities
^^^^^^^^^^^^^^^^^^^

- Humidity (%rH)
- Radon short term average (Bp/m3)
- Radon long term average (Bq/m3)
- Temperature (°C)