bme680 2.0.0

Description:

bme680 2.0.0

BME680




https://shop.pimoroni.com/products/bme680
The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality.
Installing
Full install (recommended):
We've created an easy installation script that will install all pre-requisites and get your BME680
up and running with minimal efforts. To run it, fire up Terminal which you'll find in Menu -> Accessories -> Terminal
on your Raspberry Pi desktop, as illustrated below:

In the new terminal window type the command exactly as it appears below (check for typos) and follow the on-screen instructions:
git clone https://github.com/pimoroni/bme680-python
cd bme680-python
./install.sh

Note Libraries will be installed in the "pimoroni" virtual environment, you will need to activate it to run examples:
source ~/.virtualenvs/pimoroni/bin/activate

Development:
If you want to contribute, or like living on the edge of your seat by having the latest code, you can install the development version like so:
git clone https://github.com/pimoroni/bme680-python
cd bme680-python
./install.sh --unstable

In all cases you will have to enable the i2c bus:
sudo raspi-config nonint do_i2c 0

Documentation & Support

Guides and tutorials - https://learn.pimoroni.com/bme680-breakout
Get help - http://forums.pimoroni.com/c/support

2.0.0

Repackage to hatch/pyproject.toml
Drop Python 2.7 support
Switch from smbu2 to smbus2

1.1.1

New: constants to clarify heater on/off states

1.1.0

New: support for BME688 "high" gas resistance variant
New: set/get gas heater disable bit
Enhancement: fail with descriptive RuntimeError when chip is not detected

1.0.5

New: set_temp_offset to calibrate temperature offset in degrees C

1.0.4

Fix to range_sw_err for extremely high gas readings
Convert to unsigned int to fix negative gas readings

1.0.3

Merged temperature compensation fix from Bosch's BME680_driver 3.5.3

1.0.2

Fixed set_gas_heater_temperature to avoid i2c TypeError

1.0.1

Added Manifest to Python package

1.0.0

Initial release