GitLocker: The Coding Marketplace

Description:

cubieleds 0.1

# Cubieboard LED python moduleControl the green and blue LED on the Cubieboard with python.Tested with python 2.7+ and 3+### Enable LED support on the CubieboardIn order to use this module you need a Cubieboard (obviously), running somesort of linux. I have tested on Archlinux arm, but anything that run on theCubieboard should work.Then you need to activate the LEDs as [described here](http://linux-sunxi.org/Cubieboard/Programming/StatusLEDs).I also had to load the module: leds_sunxi### UsageThe module is pretty simpel. This is how it works:```python>>> import Cubie.leds# turn on the blue LED>>> Cubie.leds.on("blue")True# check status of blue LED>>> Cubie.leds.status("blue")1# Turn off blue LED>>> Cubie.leds.off("blue")True# check status again>>> Cubie.leds.status("blue")0# It is also possible to add a trigger, eg. the mmc0 trigger which will make# the LED blink on SD card activity>>> Cubie.leds.trigger("green", "mmc0")True>>> Cubie.leds.trigger_status("green")'mmc0'```