Description:

dannytrigoonkyoeiscp 1.2.14

This is a Python library to control and interact with Onkyo receivers
over the network. It is also a ready-made command line script you
can use without knowing how to program.
Finally, this repository contains a YAML file containing all the
commands defined by the Onkyo protocol, automatically generated by
parsing the official documentation. Even if you are not using
Python, you may find this file useful when implementing your own
interface. See further down below for more information.

Installation
Most recent released version:
$ easy_install onkyo-eiscp


Usage
The package installs a script called onkyo, that can be used from the
command line:
$ onkyo system-power=off
This will turn your receiver off. You may notice that you haven’t given any
information as to where in the network your receiver is. The script should
in fact be able to find your Onkyo device by itself.
To see which receivers the script is able to find, you can use:
$ onkyo --discover
If you have multiple receivers on your network, then by default, it will
simply connect to the first device found (which may be a different one
every time).
You can select a specific one by filtering by name:
$ onkyo --discover
TX-NR709 192.168.178.200:60128 0009B0D34163
TX-NR609 192.168.178.169:60128 0009B0D24B75

$ onkyo -n 709 system-power=on
This will only turn on the TX-NR709 device.
Or using the unique identifier:
$ onkyo -i 0009B0D24B75 system-power=on
This will turn on the TX-NR609 device.
There is also an --all flag, to send you commands to all devices at once.
Finally, you are of course able to manually specify the device to connect to:
$ onkyo --host 172.20.0.144 volume=55
$ onkyo --host 172.20.0.144 --port 42424 volume=55
To find out which commands are available, use the --help-commands option.


Commands
A command consists of three parts: The zone, the command, and the arguments.
Here are some examples:
system-power=on
zone2.power=on
main.balance=3
As you can see, the basic format is:
zone.command=argument
If you do not specify a zone, then main is assumed.
There are some variations on this syntax that are possible, for example the
following are all equivalent:
power on
power:on
main.power on
main power on
In other words, instead of the . and = separators, whitespace may
be used, and the colon : is an alternative to =. However, it’s best
to use the suggested syntax above.
The names of these commands are defined by this project, and are rewritten
to actual low-level eISCP commands Onkyo uses. If you know them, you can
also send such low-level commands directly:
$ onkyo SLI26 # Selects the "Tuner" source.

Notes on Power On
For the power on command to work while the device is in standby, make
sure you turn on the obtusely named
Setup -> Hardware -> Network -> Network Control option.
Without it, you can only connect to your receiver while it is already
turned on.



Python module
In a simple case, this might look like this:
import eiscp

# Create a receiver object, connecting to the host
receiver = eiscp.eISCP('192.168.1.125')

# Turn the receiver on, select PC input
receiver.command('power on')
receiver.command('source pc')

receiver.disconnect()
Don’t forget to call disconnect() to close the socket. You can also use
a with statement:
with eiscp.eISCP('192.168.1.125') as receiver:
receiver.command('source all-ch-stereo')
The command language is explained above. You can also be more explict with
the structure:
receiver.command('power', 'on', zone='main')
If you prefer to send low-level ISCP commands directly, you can use the
raw method:
receiver.raw('MVLUP')
The function command_to_iscp will allow you to convert a high-level
command to a low-level ISCP message for use with eISCP.raw.

Receiving messages
The Onkyo receiver will send messages to you as well. Specifically, it
returns a response to every command you send, either by repeating the
command you have sent back to you, or, in case you sent a query
message, reporting the answer to you query. It will also send unsolicited
status updates to you whenver the state of the receiver changes.
API-wise, the eISCP.raw and eISCP.command return the
response received from the Onkyo device. They are blocking.
To receive other messages, there is eISCP.get, which will
either return a message or None. You may specify a custom timeout
value.

Warning
At least for now, there is no queue. If you call
eISCP.raw or eISCP.command, any messages not picked
up via eISCP.get are lost.

A problem with the Onkyo protocol is that there is no fool-proof way to
differentiate a response from unsolicited status updates. Generally, this
won’t be an issue, though in theory the response that is given to you
after sending SLI05 may be a SLI06 update from another controller.
It is thus preferable to approach the protocol in a different way. Instead
of using eISCP.raw or eISCP.command, which try to serialize
the exchange into a request-response scheme, you may also use
eISCP.send, which dispatches a message without waiting for a response.
You would then use get to process all incoming messages in the same
way, regardless of why they were sent. This works well, since a response to
either a command or a query is no different than a status update.


Async API
There is also an experimental eiscp.Receiver, which has the
same api as eiscp.eISCP, but uses a background thread for
network communication. This allows you to handle incoming messages
via a callback:
def message_received(message):
print message

receiver = Receiver('...')
receiver.on_message = message_received
Note that the on_message handler is executed on the background
thread, so you may want to use a queue.
For consistancy, eISCP.raw and eISCP.command are still
designed to artificially block, while eISCP.send is non-blocking.


Device discovery
You can have it find the receivers on your local network:
for receiver in eiscp.eISCP.discover(timeout=5):
receiver.command('power off')
This will turn off all the Onkyo receivers on your network.
A discovered device has an info attribute that gives you some data:
{'iscp_port': '60128', 'identifier': '0009B04448E0',
'area_code': 'XX', 'model_name': 'TX-NR709', 'device_category': '1'}



Limitations

Some commands require a more complex argument structure, like
variable-length strings, and those are not yet supported (you can
send them in raw mode of course).



The YAML file
This repository contains a YAML file containing all the commands
defined by the Onkyo protocol, automatically generated by
parsing the official Excel documentation, and then further adjusted
manually.
The idea is to have a computer-readable definition of the Onkyo
protocol, where Onkyo’s internal low-level commands are mapped to
identifiers that can be understood by humans, and which include
descriptions.
Parsing the Onkyo Excel document gets you astonishingly far, but
there’s a limit. The YAML file requires manual edits and fixes where
the parser fails, including a lot of cosmetic corrections. Some of
those have been made, but there’s significant room for improving
the YAML description of the protocol.
The process and the specific YAML formatting have been chosen to
allow future changes to the Onkyo master document to be merged with
the manual adjustments made as painlessly as possible.
To summarize, if you are implementing your own interface to Onkyo,
even if it’s in a language other than Python, I encourage you to
consider using this YAML file as a basis for the command interface
you provide to users. You’ll have a complete list of available
commands, values, and even supported devices.


Related Links

Documents from Onkyo describing the protocol, including lists of supported commands:

http://michael.elsdoerfer.name/onkyo/ISCP_AVR_134.xlsx
http://michael.elsdoerfer.name/onkyo/ISCP_AVR_2014.Models.xlsx
http://michael.elsdoerfer.name/onkyo/ISCP-V1.26_2013.xlsx
http://michael.elsdoerfer.name/onkyo/ISCP-V1.21_2011.xls


The repository on which this was originally based on:
https://github.com/compbrain/Onkyo-TX-NR708-Control

An implementation in Perl:
https://github.com/beanz/device-onkyo-perl

An implementation in C#:
http://code.google.com/p/onkyo-eiscp-remote-windows/

An implementation in Object-C:
https://github.com/janten/onkyo-eiscp-remote-mac

MQTT connectivity for onkyo-eiscp, adhering to the mqtt-smarthome specification:
https://github.com/owagner/onkyo2mqtt

Some Java code that deserves credit for providing the original Onkyo protocol documentation linked above:
https://sites.google.com/a/webarts.ca/toms-blog/Blog/new-blog-items/javaeiscp-integraserialcontrolprotocol

License

For personal and professional use. You cannot resell or redistribute these repositories in their original state.

Share

• Share on Facebook
• Share on Twitter