GitLocker: The Coding Marketplace

Description:

jsonvisitor 1.0.0

PyJsonVisitor
Implements a JSON parser using the Visitor pattern.
Table of Contents

Visitor Pattern
Usage

Adapters

Simple Adapters

Provided Simple Adapters

Contextual Adapters

Provided Contextual Adapters

Subscriptions
Terminal Utility

Acknowledgements

Visitor Pattern
The Visitor pattern is a structural software pattern which allows the separation of an algorithm from the algorithm's input through the use of contextual event handlers. A BaseAdapter class provides the contextual event handlers for different JSON element types and a child class overrides only the event handlers required by the specific algorithm. Since each adapter is completely independent and a specific algorithm's implementation is separated from the input JSON elements, multiple adapters can process the same JSON element events in parallel without interferrence.
Usage
Normal usage would consist of writing an adapter derived from a BaseAdapter to handle the published events, although two subscriptions have been provided for external subscriber event publishing and a terminal utility has been provided to expose the event sequence for adapter development.
Adapters
There are two categories of adapters provided, simple adapters and contextual adapters. The primary difference between the simple adapters and the contextual adapters are amount of scope data stored through the iteration: the simple adapters do not store scope data while the contextual adapters store scope data applicable to the scope.
Simple Adapters
The simple adapters provide the following event handlers:

before_document_start()
process_document_start()
after_document_start()
before_document_end()
process_document_end()
after_document_end()
before_object_start()
process_object_start()
after_object_start()
before_object_end()
process_object_end()
after_object_end()
before_list_start()
process_list_start()
after_list_start()
before_list_end()
process_list_end()
after_list_end()
before_list_item_start()
process_list_item_start()
after_list_item_start()
before_list_item_end()
process_list_item_end()
after_list_item_end()
before_list_item_value_start()
process_list_item_value_start()
after_list_item_value_start()
before_list_item_value_end()
process_list_item_value_end()
after_list_item_value_end()
before_member_start()
process_member_start()
after_member_start()
before_member_end()
process_member_end()
after_member_end()
before_member_key( name )
process_member_key( name )
after_member_key( name )
before_member_value_start()
process_member_value_start()
after_member_value_start()
before_member_value_end()
process_member_value_end()
after_member_value_end()
before_value( value )
process_value( value )
after_value( value )

The simple adapters do not store any element scope data.
Provided Simple Adapters

BaseAdapter: The parent adapter class from which all other adapters are derived.
CompositeAdapter: This is an adapter contains a list of other adapters. When an event is handled by the CompositeAdapter, the event is published to all adapters the CompositeAdapter has in its list. The CompositeAdapter inherits from the BaseAdapter.
ScopeAdapter: This adapter builds the element scope for any element as the JSON file is being parsed. The ScopeAdapter inherits from the BaseAdapter.
ScopeInspectionAdapter: This adapter prints the node events from the JSON file to standard output as the JSON file is being parsed; only the process_* event handlers are invoked. The ScopeInspectionAdapter inherits from the ScopeAdapter.

Contextual Adapters
The contextual adapters provide all of the event handlers provided by the simple adapters as well as the following event handlers:

before_document( root_scope)
process_document( root_scope )
after_document( root_scope )
before_object( members )
process_object( members )
after_object( members )
before_member( name, value )
process_member( name, value )
after_member( name, value )
before_list( items )
process_list( items )
after_list( items )
before_list_item( index, value )
process_list_item( index, value )
after_list_item( index, value )

The contextual adapters store the necessary element scope data required to associate an element with the element's subordinate data.
Provided Contextual Adapters

BaseAdapter: The parent adapter class from which all other contextual adapters are derived. The BaseAdapter inherits from the ScopeAdapter.
CompositeAdapter: This adapter contains a list of other adapters. When an event is handled by the CompositeAdapter, the event is published to all adapters the CompositeAdapter has in its list. The CompositeAdapter inherits from the contextual BaseAdapter.
InspectionAdapter: This adapter prints the node events from the JSON file to standard output as the JSON file is being parsed; only the process_* event handlers are invoked. The InspectionAdapter inherits from the contextual BaseAdapter and the ScopeInspectionAdapter.

Default Event Handler Behavior
The event handlers implemented in the BaseAdapter classes call a different method based on the event handler's timing; this method as implemented in the simple BaseAdapter class has an empty body but can be overridden in a child class to apply a default behavior to all event handlers with specific timing. The methods are as follows:

The before_* event handlers invoke the default_before( *args, **kwargs ) method.
The process_* event handlers invoke the default_process( *args, **kwargs ) method.
The after_* event handlers invoke the default_after( *args, **kwargs ) method.

Subscriptions
Two subscriptions are provided for event consumption by adapter-external subscribers. Callbacks are registered with the subscription using the register( subscription_key, callback ) method; valid subscription keys are retrieved using the subscription_keys property.

SimpleSubscription: This subscription publishes the events in the simple BaseAdapter.
ContextualSubscription: This subscription publishes the events in the contextual BaseAdapter.

Terminal Utility
If the json_visitor package is invoked on the terminal (using python3 -m json_visitor), the InspectionAdapter prints out the JSON element nodes in a given input source. The utility's help describes the options and inputs supported:
usage: json_visitor [-h] [-i | -I] [-f <file path>] [-s <string literal>]

Processes the input JSON strings or files and outputs the visitation events.

optional arguments:
-h, --help show this help message and exit
-i, --output-processing-info
Enables the output of the processing information. This
is the default.
-I, --suppress-processing-info
Suppresses the output of the processing information.
-f <file path>, --file <file path>
JSON file path to process; relative paths are relative
to the current working directory.
-s <string literal>, --string <string literal>
JSON string literal to process.

The command (on Linux) python3 -m json_visitor -s "{ \"v\": [ 1, 2,3, 4, 5, 6, { \"key0\": \"value\", \"key1\": {} }] }" results in the following output:
document_start
object_start
member_start
member_key: (0: v)
member_value_start
list_start
list_item_start
list_item_value_start
value: (0: 1)
list_item_value_end
list_item_end
process_list_item: (0: 0), (1: 1)
list_item_start
list_item_value_start
value: (0: 2)
list_item_value_end
list_item_end
process_list_item: (0: 1), (1: 2)
list_item_start
list_item_value_start
value: (0: 3)
list_item_value_end
list_item_end
process_list_item: (0: 2), (1: 3)
list_item_start
list_item_value_start
value: (0: 4)
list_item_value_end
list_item_end
process_list_item: (0: 3), (1: 4)
list_item_start
list_item_value_start
value: (0: 5)
list_item_value_end
list_item_end
process_list_item: (0: 4), (1: 5)
list_item_start
list_item_value_start
value: (0: 6)
list_item_value_end
list_item_end
process_list_item: (0: 5), (1: 6)
list_item_start
list_item_value_start
object_start
member_start
member_key: (0: key0)
member_value_start
value: (0: value)
member_value_end
member_end
process_member: (0: key0), (1: value)
member_start
member_key: (0: key1)
member_value_start
object_start
object_end
process_object: (0: {})
member_value_end
member_end
process_member: (0: key1), (1: {})
object_end
process_object: (0: {'key0': 'value', 'key1': {}})
list_item_value_end
list_item_end
process_list_item: (0: 6), (1: {'key0': 'value', 'key1': {}})
list_end
process_list: (0: (1, 2, 3, 4, 5, 6, {'key0': 'value', 'key1': {}}))
member_value_end
member_end
process_member: (0: v), (1: (1, 2, 3, 4, 5, 6, {'key0': 'value', 'key1': {}}))
object_end
process_object: (0: {'v': (1, 2, 3, 4, 5, 6, {'key0': 'value', 'key1': {}})})
document_end
process_document: (0: {'v': (1, 2, 3, 4, 5, 6, {'key0': 'value', 'key1': {}})})
Number of scope events processed: 103

Acknowledgements
The hard work of turning JSON into an event stream is done by the ijson package, without which the Visitor interface would have been much more challenging to develop.