picpro 0.1.3

Description:

picpro 0.1.3

picpro a kitsrus PIC CLI programmer
This is complete rewrite of kitsrus_pic_programmer into Python 3 + bunch of fixes and features.

Supported kitsrus programmers
* K128
* K149-A
* K149-B
* K150 (Tested)

See http://www.kitsrus.com/pic.html
Installation
PIP (pip3 on some distros)
pip install picpro

Repository
You can also use these repositories maintained by me
Debian and derivatives
Add repository by running these commands
$ wget -O- https://repository.salamek.cz/deb/salamek.gpg | sudo tee /usr/share/keyrings/salamek-archive-keyring.gpg
$ echo "deb [signed-by=/usr/share/keyrings/salamek-archive-keyring.gpg] https://repository.salamek.cz/deb/pub all main" | sudo tee /etc/apt/sources.list.d/salamek.cz.list

And then you can install a package picpro
$ apt update && apt install picpro

Archlinux
Add repository by adding this at end of file /etc/pacman.conf
[salamek]
Server = https://repository.salamek.cz/arch/pub/any
SigLevel = Optional

and then install by running
$ pacman -Sy picpro

Usage
Command details:
program Program PIC chip.
verify Verify PIC flash.
dump Dump PIC data as binary.

Usage:
picpro program -p PORT -i HEX_FILE -t PIC_TYPE [--id=PIC_ID] [--fuse=FUSE_NAME:FUSE_VALUE...] [--icsp]
picpro verify -p PORT -i HEX_FILE -t PIC_TYPE [--icsp]
picpro dump <mem_type> -p PORT -b BIN_FILE -t PIC_TYPE [--icsp]
picpro (-h | --help)


Options:
--icsp Enable ISCP programming.
--fuse=FUSE_NAME:FUSE_VALUE Set fuse value directly.
--id=PIC_ID Set PIC id to be programmed in pic.
-p PORT --port=PORT Set serial port where programmer is connected.
-t PIC_TYPE --pic_type=PIC_TYPE Pic type you are programming/reading.
-i HEX_FILE --hex_file=HEX_FILE Hex file to flash or to read.
-b BIN_FILE --bin_file=BIN_FILE Bin file path.


Program chip
picpro program -p /dev/ttyUSB0 -i YOUR_HEX_FILE.hex -t 12F675

Verify chip program
picpro verify -p /dev/ttyUSB0 -i YOUR_HEX_FILE.hex -t 12F675

Dump ROM as bin file
picpro dump rom -p /dev/ttyUSB0 -b dump.rom -t 12F675

Dump EEPROM as bin file
picpro dump eeprom -p /dev/ttyUSB0 -b dump.eeprom -t 12F675

Program chip via ISCP
picpro program -p /dev/ttyUSB0 -i YOUR_HEX_FILE.hex -t 12F675 --icsp

Program chip and override fuses provided from HEX file
picpro program -p /dev/ttyUSB0 -i YOUR_HEX_FILE.hex -t 12F675 --fuse=FUSE_NAME:FUSE_VALUE --fuse=FUSE_NAME:FUSE_VALUE