pygeoprocessing 2.4.4

Description:

pygeoprocessing 2.4.4

About PyGeoprocessing
PyGeoprocessing is a Python/Cython based library that provides a set of
commonly used raster, vector, and hydrological operations for GIS processing.
Similar functionality can be found in ArcGIS/QGIS raster algebra, ArcGIS zonal
statistics, and ArcGIS/GRASS/TauDEM hydrological routing routines.
PyGeoprocessing is developed at the Natural Capital Project to create a
programmable, open source, and free Python based GIS processing library to
support the InVEST toolset. PyGeoprocessing’s design prioritizes
computation and memory efficient runtimes, easy installation and cross
compatibility with other open source and proprietary software licenses, and a
simplified set of orthogonal GIS processing routines that interact with GIS
data via filename. Specifically the functionally provided by PyGeoprocessing
includes:

a suite of raster manipulation functions (warp, align, raster calculator,
reclassification, distance transform, convolution, and fast iteration)
a suite of vector based manipulation function (zonal statistics,
rasterization, interpolate points, reprojection, and disjoint polygon sets)
a simplified hydrological routing library (D8inf/MFD flow direction,
plateau drainage, weighted and unweighted flow accumulation, and weighted
and unweighted flow distance)



Installing PyGeoprocessing
$ pip install pygeoprocessing
If you import pygeoprocessing and see a ValueError: numpy.dtype has the
wrong size, try recompiling, this is the result of a version compatibility
issue with the numpy API in the precompiled pygeoprocessing binaries.
The solution is to recompile pygeoprocessing on your computer:
$ pip uninstall -y pygeoprocessing
$ pip install pygeoprocessing --no-deps --no-binary :all:

Requirements
Note the pip-installable requirements in requirements.txt are for best
results, but older package versions may also work. If necessary,
PyGeoprocessing can be installed without dependencies with pip install
--no-deps.



API Documentation
API documentation is available at https://pygeoprocessing.readthedocs.io/en/latest/


Release History

2.4.4 (2024-05-21)

Our github actions for building python distributions now use
actions/setup-python@v5, which uses node 20.
https://github.com/natcap/pygeoprocessing/issues/384
warp_raster and build_overviews no longer raise a ValueError if
called with an invalid resampling algorithm. We now fall back to the
underlying GDAL functions’ error messages.
https://github.com/natcap/pygeoprocessing/issues/387
Updated to Cython 3.
Dropped support for Python 3.7.



2.4.3 (2024-03-06)

Wheels for python 3.12 are now built during our github actions runs.
https://github.com/natcap/pygeoprocessing/issues/381
get_gis_type can accept a path to a remote file, allowing the GDAL driver
to open it if the driver supports the protocol.
https://github.com/natcap/pygeoprocessing/issues/375
If running on a SLURM system (identified by the presence of SLURM*
environment variables), the GDAL cache max is checked against the amount of
memory available on the compute node. If GDAL may exceed the available slurm
memory, a warning is issued or logged.
https://github.com/natcap/pygeoprocessing/issues/361
Fixed an issue in extract_strahler_streams_d8 where a nodata pixel
could be mistakenly treated as a stream seed point, ultimately creating
a stream feature with no geometry.
https://github.com/natcap/pygeoprocessing/issues/361
Improved align_and_resize_raster_stack so that rasterization of a vector
mask only happens once, regardless of the number of rasters in the stack.
In addition, the created mask raster’s path may be defined by the caller so
that it persists across calls to align_and_resize_raster_stack.
https://github.com/natcap/pygeoprocessing/issues/366
Improved warp_raster to allow for a pre-defined mask raster to be
provided instead of a vector. If both are provided, the mask raster alone is
used. The new mask raster must have the same dimensions and geotransform as
the output warped raster. https://github.com/natcap/pygeoprocessing/issues/366
Fixed a bug in zonal_statistics where the wrong number of disjoint
polygon sets were being reported in the logs.
https://github.com/natcap/pygeoprocessing/issues/368
Pygeoprocessing is now tested against python 3.12.
https://github.com/natcap/pygeoprocessing/issues/355



2.4.2 (2023-10-24)

Fixed an issue where MFD flow direction was producing many nodata holes given
a large-enough DEM. These nodata holes would then propagate to flow
accumulation and stream extraction, producing very disjointed stream
networks. https://github.com/natcap/pygeoprocessing/issues/350
Improved progress logging in MFD flow direction, MFD flow accumulation, MFD
stream extraction to prevent integer overflows in percentages and improve
the readability of log messages. https://github.com/natcap/pygeoprocessing/issues/246
Fixed an issue introduced in 2.4.1 where zonal_statistics results could
vary depending on the bounding boxes of the disjoint polygon sets calculated
from the input vector.
Added a new function, pygeoprocessing.align_bbox, which pads a bounding
box to align with the grid of a given geotransform.
Added support for int64 and uint64 (GDAL 3.5+)
https://github.com/natcap/pygeoprocessing/issues/352
Added support for signed bytes (GDAL 3.7+)
https://github.com/natcap/pygeoprocessing/issues/329
Fixed a bug where calculate_slope did not work as expected when the DEM
raster’s nodata value is NaN (https://github.com/natcap/pygeoprocessing/issues/352)



2.4.1 (2023-09-05)

The pygeoprocessing package metadata has been updated to use
importlib.metadata (python >= 3.8) or importlib_metadata
(python < 3.8) for retrieving the package version, in keeping with
recommendations from setuptools_scm. The dependency
importlib_metadata is now required for installs on python < 3.8.
Fixed another memory leak in pygeoprocessing.raster_calculator, where
shared memory objects under certain circumstances were not being unlinked at
the end of the function, resulting in excess memory usage and a warning
during the shutdown of the python process.
https://github.com/natcap/pygeoprocessing/issues/247
Added a new function, pygeoprocessing.array_equals_nodata, which returns
a boolean array indicating which elements have nodata. It handles integer,
float, and nan comparison, and the case where the nodata value is None.
Standardized the approach used in warp_raster and
create_raster_from_bounding_box for determining the dimensions of the
target raster given a target bounding box and pixel sizes.
https://github.com/natcap/pygeoprocessing/issues/321
pygeoprocessing.routing.delineate_watersheds_d8 now handles the case
where the input flow direction raster does not have a defined spatial
reference. https://github.com/natcap/pygeoprocessing/issues/254
Updating internal documentation describing TauDEM flow directions, and adding
for how to convert from a flow direction raster from what TauDEM expects to
what pygeoprocessing expects.
https://github.com/natcap/pygeoprocessing/issues/255
Users may now specify the overview level to use when calling warp_raster.
By default, pygeoprocessing will use the base layer.
https://github.com/natcap/pygeoprocessing/issues/326
Fixed a bug across pygeoprocessing where some valid resampling methods
would throw an exception because they were not recognized. This was only
happening when pygeoprocessing was installed alongside GDAL < 3.4.
Fixing an issue with pygeoprocessing.multiprocessing.raster_calculator
where the function would raise an Exception when the target raster path was
provided as a filename only, not within a directory, even though the parent
directory could be inferred. https://github.com/natcap/pygeoprocessing/issues/313
Fixing a bug where the statistics worker in
pygeoprocessing.raster_calculator may return a complex value. This is
only an issue when pygeoprocessing is compiled against Cython 3.0.0 and
later. https://github.com/natcap/pygeoprocessing/issues/342
Added the new function pygeoprocessing.raster_map, a higher-level version
of raster_calculator. https://github.com/natcap/pygeoprocessing/issues/235



2.4.0 (2023-03-03)

A new submodule, pygeoprocessing.kernels has been added to facilitate the
creation of kernel rasters needed for calls to
pygeoprocessing.convolve_2d. Functions for creating common decay kernels
have been added, along with functions to facilitate the creation of
distance-based kernels using a user-defined function
(pygeoprocessing.create_kernel) and to facilitate the creation of kernels
using custom 2D numpy arrays, such as those commonly used in image processing
(pygeoprocessing.kernel_from_numpy_array).
https://github.com/natcap/pygeoprocessing/issues/268
Logging across functions in pygeoprocessing.geoprocessing now correctly
reports the function that it’s being called from rather than <lambda>.
https://github.com/natcap/pygeoprocessing/issues/300
The function pygeoprocessing.reproject_vector now accepts an optional
parameter layer_name to allow the target vector layer name to be defined
by the user. If the user does not provide a layer_name, the layer name
will be copied from the source vector.
https://github.com/natcap/pygeoprocessing/issues/301
Implement the proposed new function pygeoprocessing.raster_reduce, a
wrapper around pygeoprocessing.iterblocks
(https://github.com/natcap/pygeoprocessing/issues/285)
Nodata value checking in pygeoprocessing.routing now correctly handles
comparison of nan values. This is explicitly tested in
pygeoprocessing.routing.fill_pits, but should also improve the
experience of other routing functions as well.
https://github.com/natcap/pygeoprocessing/issues/248
Added a function to build overviews for a raster,
pygeoprocessing.build_overviews. Related to this,
pygeoprocessing.get_raster_info() now includes an 'overviews' key
listing the pixel dimensions of each overview layer in a raster.
https://github.com/natcap/pygeoprocessing/issues/280
Added a D8 stream extraction function at
pygeoprocessing.routing.extract_streams_d8 which takes a D8 flow
accumulation raster and a flow accumulation threshold, setting all pixels
with accumulation above that threshold to 1 and all other valid pixels to 0.
https://github.com/natcap/pygeoprocessing/issues/272
Adding a new function, pygeoprocessing.create_raster_from_bounding_box,
that enables the creation of a new raster from a bounding box.
https://github.com/natcap/pygeoprocessing/issues/276
Win32 wheels of PyGeoprocessing are no longer created through our GitHub
Actions workflows and will no longer be produced or distributed as part of
our release checklist. For details (and metrics!) see:
https://github.com/natcap/pygeoprocessing/issues/232



2.3.5 (2022-12-13)

pygeoprocessing.calculate_disjoint_polygon_set now offers an optional
parameter, geometries_may_touch for cases where geometries are known to
have intersecting boundaries but nonintersecting interiors.
https://github.com/natcap/pygeoprocessing/issues/269
Pygeoprocessing is now tested against Python 3.11.
Adding the target filename to progress logging in
pygeoprocessing.raster_calculator.
pygeoprocessing.zonal_statistics will now optionally include a count of
the number of pixels per value encountered under each polygon. A warning
will be logged when invoked on floating-point rasters, as using this on
continuous rasters can result in excessive memory consumption. To use this
feature, set include_value_counts=True when calling zonal_statistics.
pygeoprocessing.get_gis_type will now raise a ValueError if the file
cannot be opened as gdal.OF_RASTER or gdal.OF_VECTOR.
https://github.com/natcap/pygeoprocessing/issues/244
Fixing an error message in convolve_2d when the signal or kernel is a
row based blocksize. https://github.com/natcap/pygeoprocessing/issues/228.



2.3.4 (2022-08-22)

Fixing an issue with imports at the pygeoprocessing module level that was
causing linters like PyLint and IDE command-completion programs like JEDI-vim
to not be able to identify the attributes of the pygeoprocessing module
namespace.
Reducing the amount of memory used by
pygeoprocessing.new_raster_from_base when filling an array with values to
only as much memory as is needed for the datatype.
Fixing a memory leak in pygeoprocessing.raster_calculator where
shared memory objects were being inadvertently created when they should not
have been and then they were not subsequently destroyed.
calculate_disjoint_polygon_set will now skip over empty geometries.
Previously, the presence of empty geometries would cause an error to be
raised.
Fixed a DeprecationWarning in calculate_disjoint_polygon_set caused
by the use of a deprecated logging warn method.



2.3.3.post0 (2022-01-28)

Post-release due to corrupted sdist released on Github and PyPI. The sdist
for 2.3.3 failed to install. The wheels were unaffected. No code changes.



2.3.3 (2022-01-26)

Fixing a bug in shapely_geometry_to_vector where a feature name mismatch
between the fields and attribute_list inputs would silently pass
under most circumstances. Now an informative ValueError is raised.
Testing against Python 3.10.
Pinned numpy versions in pyproject.toml to the lowest compatible
version for each supported python version. This prevents issues when
pygeoprocessing is used in an environment with a lower numpy version
than it was built with (https://github.com/cython/cython/issues/4452).



2.3.2 (2021-09-08)

Restore functionality in reclassify_raster that allows for nodata
values to be reclassified. This was accidentally removed in 2.3.1.



2.3.1 (2021-08-24)

Slightly change the error message displayed for a
ReclassificationMissingValuesError.
Handle float nodata values correctly in reclassify_raster.
Fix a bug in distance_to_channel_mfd where pixels that only partially
drained to a stream were given incorrect distances.
Fixed an issue with raster_band_percentile that would raise an
exception if an input raster had an undefined nodata value and/or
would cause an invalid result if the raster contained non-finite
values.
After many years with the Natural Capital Project, Rich Sharp has stepped
down from the Project and as the maintainer of pygeoprocessing. James
Douglass is taking his place, and this change is now reflected in
setup.py.



2.3.0 (2021-06-21)

Added a single_outlet_tuple parameter to routing.fill_pits that
forces a DEM to only have one outlet at any point on the raster. The
fill effect is that all pixels will drain to the raster coordinate at
single_outlet_tuple.
Added a detect_lowest_sink_and_drain function that finds the lowest
DEM pixel that drains to nodata/edge and the lowest DEM pixel that could
be a sink. The values that result from this call can be used to condition
a DEM that is known to have a single drain using the
single_outlet_tuple parameter in routing.fill_pits.
Fixed a bug in routing.fill_pits that could cause the nodata region of
a DEM to be incorrectly filled with non-nodata values.
Fixed an issue where create_raster_from_vector_extent would use an
approximation of the layer extent to infer the input vector extent. Now
uses the individual geometry to infer vector extents.
Fixed a bug in routing.distance_to_channel_mfd where pixels that drained
off the edge of the raster had negative values rather than nodata values.
Expanded the error message raised by transform_bounding_box when the
bounding box cannot be transformed to provide more helpful details.
Add support and testing for GDAL 3.3.0.
Fixed exception occuring in stitch_rasters when base rasters were
larger than the target raster on the y axis.



2.2.0 (2021-05-14)

Adding explicit support for Python 3.9 and testing on Python 3.9.
Fixed an issue in create_raster_from_vector_extents that would cause a
confusing exception to be raised if there was no geometry in the vector.
Now raises a ValueError with a helpful error message.
Changed parameters in convolve_2d to allow API to set
ignore_nodata_and_edges=True while mask_nodata=False and updated
docstring to indicate this is useful in cases such as filling nodata holes
in missing datasets. Additionally added a logger debug message to note
this “unusual” setting of these parameters in case of accidental usage
which could be noted during development.
Fixed issue in zonal statistics that could cause the aggregate vector to be
locked due to a dereferencing race condition. This was present in some
cases with a flaky unit test but could have been seen in practice if the
vector was deleted immediately after the call to zonal_statistics.
Fixed issue in routing.fill_pits that used a numerical “is close” test
when determining if two pixels were at equal height. In the case of
hydrological pitfilling, pixels must be exactly equal height to be
considered a plateau otherwise a drain into or out of the pixel is
resolved. Testing is close allowed a hydrological pit to remain since it
was “close” to the same height as a draining pixel.
Added a D8 Strahler order stream extraction function at
pygeoprocessing.extract_strahler_streams_d8. Creates segmented
geometric lines which correspond to streams on the landscape.
Added a D8 subwatershed calculation function at
pygeoprocessing.calculate_subwatershed_boundary. Creates subwatersheds
that are segmented at the junctions of the streams created by
pygeoprocessing.extract_strahler_streams_d8.
Removing all instances of __swig_destroy__ to prevent multiprocessing
memory corruption.
Exposing a use_shared_memory flag on raster_calculator to allow
a user to use shared memory objects when calculating statistics. This
feature is only available for Python >= 3.8. If available, this
feature creates a significant runtime improvement but can be unstable
in multiprocessing configurations. For this reason it is set to
False as the default value.
Added a max_timeout parameter to convolve_2d and
raster_calculator to allow the user to specify the maximum amount of
time to wait for worker threads to terminate. In normal operation these
threads should terminate in a short amount of time but are generously
timed with the pygeoprocessing._MAX_TIMEOUT parameter. This parameter
allows a user to tune in cases that may involve significant latency such
as in a heavy multiprocess environment.
Added a pygeoprocessing.routing.detect_outlets function that creates a
vector with points placed on the center of the pixels in a D8 or MFD flow
direction raster that are outlet pixels. The vector has additional metadata
about the (i, j) locations of the pixel in raster coordinate space.
Replacing merge_rasters with stitch_rasters that can take an
arbitrary list of raster path bands and stitch them into an existing raster
of same or different projection. Additional functionality to preserve
area variant values when stitching from a linear meters projection to
WGS84. Useful when the units of the base raster are in “units per pixel”
rather than “units per area”.
Added a max_pixel_fill_count parameter to routing.fill_pits to
guard against pitfilling large natural depression. Defaults to 500.
Fixed an issue in align_and_resize_raster_stack that would ignore
the bounds of a feature in a mask vector if the
"mask_vector_where_filter" clause was invoked and instead only
considered the entire bounds of the vector.
Fixed an issue with convolve_2d that allowed output rasters to be
created without a defined nodata value.
Fixed a LOGGER message bug that occurred in zonal_statistics.
Fixed an issue in distance_to_channel_mfd that would generate a raster
with distances to the edge of the raster even if there was no channel. Now
generates nodata so it is consistent with distance_to_channel_d8.
The convolve_2d function now raises a ValueError if either the signal
or kernel raster has a row based blocksize since this could result in
very long runtimes due to gdal cache thrashing.
Fixed an issue that would cause a convolve_2d worker to crash if the
integrating kernel was not a float and also normalize_kernel=True
thus causing the entire function call to deadlock.
Added a check on transform_bounding_box to ensure the target bounding
box’s coordinates were finite. This guards against cases where a transform
into another coordinate system creates a degenerate bounding box.
Previously the function would silently return non-finite coordinates.
Fixing issue when calculating histogram for floating point rasters the
logging progress percent would be incorrectly calculated.



2.1.2 (2020-12-03)

pygeoprocessing.warp_raster now raises a ValueError when an invalid
resampling method is provided.
Fixed bug in pygeoprocessing.warp_raster that would not properly handle
GDAL Byte type signing when masking warped raster with a vector.
Fixed issue in convolve_2d that would cause excessive memory use
leading to out of memory errors.
Fixed issue in convolve_2d that could lead to a file removal race
condition and raise a FileNotFoundException when ignoring nodata
regions.



2.1.1 (2020-09-16)

Fixed a critical bug introduced in 2.1.0 that generated invalid results in
convolve_2d for any raster larger than 256x256.
Added an optional parameter, target_layer_name to
pygeoprocessing.routing.delineate_watersheds_d8 for cases where a
caller would like to define the output layer name.



2.1.0 (2020-08-25)

Modified pygeoprocessing.numpy_array_to_raster to take boolean arrays.
Modified pygeoprocessing.convolve_2d to guard against nonsensical queries
to both ignore_nodata_and_edges=True but also mask_nodata=False.
A query of this combination now raises a ValueError to guard against
programmer error.
Added a custom exception class ReclassificationMissingValuesError to
pygeoprocessing. pygeoprocessing.reclassify_raster raises this
exception instead of ValueError when a raster pixel value is not
represented in value_map. This custom exception provides a list of
missing raster pixel values in a missing_values attribute that allows
the caller access to the pixel values that are missing through a Python type
rather than indirectly through an error message.
Correcting the docstring for pygeoprocessing.numpy_array_to_raster to
specify that the pixel_size parameter must be a tuple or list, not an
int.
pygeoprocessing.routing.delineate_watersheds_d8 now has an optional
parameter write_diagnostic_vector. When True, this parameter will
cause a new vector per outflow feature to be created in the working_dir.
This parameter defaults to False. This is a change from prior behavior,
when the diagnostic vectors were always created, which could occupy a lot of
computational time under large outflow geometries.
Added a pygeoprocessing.multiprocessing.raster_calculator function which
matches the API and results of pygeoprocessing.raster_calculator but uses
multiple processing cores to compute raster calculation blocks.
when the diagnostic vectors were always created, which could occupy
significant computational time under large outflow geometries.
Minor performance improvement to pygeoprocessing.convolve_2d by
preventing a pre-processing step that initialized temporary rasters with zero
values as well as added asynchronous work distribution for kernel/signal
block processing.
Modified logging message for pygeoprocessing.new_raster_from_base when
filling a raster such that an informative error message is printed with
context as to the function, file, status, and value being filled.



2.0.0 (05-19-2020)

Adding Python 3.8 support and dropping Python 3.6 support.
Adding GDAL 3 support and dropping GDAL 2 support. The only non-backwards
compatible issue in GDAL 2 to GDAL 3 is the need to handle Axis Ordering with
osr.SetAxisMappingStrategy(osr.OAMS_TRADITIONAL_GIS_ORDER) because of
https://trac.osgeo.org/gdal/wiki/rfc73_proj6_wkt2_srsbarn#Axisorderissues?.
Since Axis ordering now matters for Geographic CRS the expected order is
Lat,Lon but we use osr.OAMS_TRADITIONAL_GIS_ORDER to swap to Lon,Lat.
Using osr.CreateCoordinateTransformation() instead of
osr.CoordinateTransformation() as the GDAL 3 call.
Fixed a bug in convolve_2d that would not ignore_nodata if the signal
raster’s nodata value was undefined. Changed the name of this flag to
ignore_nodata_and_edges to reflect its expected functionality.
Warped signed byte rasters are now also signed byte rasters.
Adding a GitHub Actions-based build job for building wheels and a source
distribution for a given commit of pygeoprocessing.
Updated setup.py to point the URL project link to the project’s new
home on GitHub.
Updated MANIFEST.in to only include files that should be there in the
pygeoprocessing source distribution. This fixes an issue where files
matching a variety of extensions anywhere in the pygeoprocessing directory
might be included with the source distribution.
Added set_tol_to_zero to convolve_2d to allow for in-function masking
of near-zero results to be set to 0.0.
Fixed malformed logging outputs which could be seen during long running
rasterize calls.
Renamed all parameters involving Spatial Projections to the form
[var_id]_projection_wkt, this involves optional arguments in
reproject_vector, warp_raster, transform_bounding_box,
and align_and_resize_raster_stack as well as the return value from
get_raster_info and get_vector_info.
Fixed an issue in zonal_statistics that would crash if an aggregate
vector had a feature with no geometry defined. Now the function ignores
such features and prints a warning to the log.
Fixed a malformed ValueError message when a corrupt raster was
encountered in raster_calculator.
Fixes an unnecessary calculation that pre-fills slope raster GeoTIFFs with
nodata values.
Added a check to convolve_2d to verify that raster path/band tuples were
passed where expected and raise a useful Exception if not.
Removed most of the pygeoprocessing.testing module and added the following
convenience functions to pygeoprocessing, which should not be used
for production code but are useful for testing and scripting:

raster_to_numpy_array - read a single band of a raster into a numpy
array, runs the risk of memory error if the raster is too large.
numpy_array_to_raster - writes a numpy array to a raster on disk.
shapely_geometry_to_vector - creates a vector from a list of
Shapely geometry.


Fixed an issue in flow_dir_mfd that would cause invalid flow directions
on DEMs that had very small numerical delta heights.
Fixes an issue in convolve_2d that would occasionally cause undefined
numerical noise in regions where the signal was nodata but mask_nodata
was set to False.



1.9.2 (2020-02-06)

Removed the multiprocessing dependency to avoid an occasional deadlock
that occurred on Mac OS X during align_and_resize_raster_stack.
That function now operates serially, but multithreading can be used by
passing gdal_warp_options.



1.9.1 (2019-12-19)

Fixed a compilation issue on Mac OS X Catalina related to the compilation
of a template in the file iteration component of the out-of-core percentile
function.
Resolved a compilation issue on Mac OS X (Mavericks and later) where
pygeoprocessing would not compile unless some additional compiler and linker
flags were provided. These are now accounted for in the package’s compilation
steps in setup.py.
pygeoprocessing.symbolic.evaluate_raster_calculator_expression
no longer depends on sympy for its expression evaluation.



1.9.0 (2019-10-22)

Fixed a memory error issue that could occur on multiple flow direction flow
accumulation calculations.
Added PEP518-compatible build dependencies to pyproject.toml, which has
been added to source distributions of pygeoprocessing.
Added an out-of-core high performance raster percentile function at
pygeoprocessing.raster_band_percentile.
Added a pygeoprocessing.symbolic.evaluate_raster_calculator_expression
function that can parse a string expression and a map of symbols to
calculate a raster calculation operation.
Modified pygeoprocessing.routing.fill_pits to create a single band
raster of the input DEM raster/path band rather than a copy of the input
DEM raster irrespective of the band number.
Fixed an issue that would cause the bounding box generated by
`transform_bounding_box to flip the min and max coordinates in some
spatial contexts.
Defaulting compression algorithm back to LZW as ZSTD is not a widely
implemented compression standard for geotiffs.



1.8.0 (2019-08-12)

Added a 'numpy_type' field to the result of get_raster_info that
contains the equivalent numpy datatype of the GDAL type in the raster. This
includes functionality differentate between the unsigned and signed
gdal.GDT_Byte vs. numpy.int8 and numpy.uint8.
Changed default compression routine for GeoTIFFs to ZSTD (thanks Facebook
https://facebook.github.io/zstd/).
Added a non-backwards compatible change by replacing the
gtiff_creation_options string to a driver/option string named
raster_driver_creation_tuple. This allows the caller to create any type
of GDAL writable driver along with the option list associated with that
driver.
Added a 'numpy_type' field to the result of get_raster_info that
contains the equivalent numpy datatype of the GDAL type in the raster. This
includes functionality differentate between the unsigned and signed
gdal.GDT_Byte vs. numpy.int8 and numpy.uint8.
Changed default compression routine for GeoTIFFs to ZSTD (thanks Facebook
https://facebook.github.io/zstd/).
Added a 'file_list' key to the dictionary returned by
get_raster_info and get_vector_info that contains a list of all the
files associated with that GIS object. The first parameter of these lists
can be passed to gdal.OpenEx to open the object directly.
Added a get_gis_type function to pygeoprocessing that takes a
filepath and returns a bitmask of pygeoprocessing.RASTER_TYPE and/or
pygeoprocessing.VECTOR_TYPE.
Modified iterblocks to raise a helpful ValueError instead of a general
NoneTypeError if a raster does not open.



1.7.0 (2019-06-27)

Removing support for Python 2.7.
Adding D8 watershed delineation as
pygeoprocessing.routing.delineate_watersheds_d8.
Corrected an issue with pygeoprocessing.create_raster_from_vector_extents
where a vector with no width or no height (a vector with a single point, for
example) would result in invalid raster dimensions being passed to GDAL.
These edge cases are now guarded against.
pygeoprocessing.calculate_disjoint_polygon_set will now raise
RuntimeError if it is passed a vector with no features in it.
pygeoprocessing.rasterize will now raise RuntimeError if the
underlying call to gdal.RasterizeLayer encounters an error.
Correcting an issue with the docstring in
pygeoprocessing.reclassify_raster to reflect the current parameters.
Changed zonal_statistics to always return a dict instead of
sometimes a defaultdict. This allows pickling of the result, if desired.
Adding automated testing via bitbucket pipelines.
Correcting an issue with pygeoprocessing.zonal_statistics that was
causing test failures on Python 3.6.
Pygeoprocessing is now tested against Python 3.7.
Fixed an issue in distance transform where a vertical striping artifact
would occur in the masked region of some large rasters when distances should
be 0.
Fixed an issue in all functionality that used a cutline polygon with
invalid geometry which would cause a crash. This was caused by gdal.Warp
when using the cutline functionality. Instead this functionality was
replaced with manual rasterization. In turn this introduces two optional
parameters:


rasterize and mask_raster have a where_clause parameter
which takes a string argument in SQL WHERE syntax to filter
rasterization based on attribute values.
warp_raster takes a working_dir parameter to manage local
temporary mask rasters.



Removing a temporary working directory that is created when executing
pygeoprocessing.convolve_2d.
Changed optional parameters involving layer indexes to be either indexes
or string ids. In all cases changing layer_index to layer_id in
the functions: get_vector_info, reproject_vector, warp_raster,
rasterize, calculate_disjoint_polygon_set, and mask_raster.



1.6.1 (2019-02-13)

Added error checking in raster_calculator to help ensure that the
target_datatype value is a valid GDAL type.
Fixed an issue in distance_transform_edt that would occasionally
cause incorrect distance calculations when the x sampling distance was > 1.



1.6.0 (2019-01-23)

Changed iterblocks API to take a raster/path band as an input rather
than a path and a list of bands. Also removed the astype_list due to
its lack of orthogonality.
Fixed bugs in convolve_2d involving inputs with nodata masking.
Changing default raster creation compression algorithm from LZW to DEFLATE,
this is to address issues where we were seeing recreatable, but
unexplainable LZWDecode errors in large raster data.
Fixed an issue that could cause the distance transform to be incorrect when
the sampling distance was in the noninclusive range of (0.0, 1.0).



1.5.0 (2018-12-12)

Specific type checking for astype_list in iterblocks to avoid
confusing exceptions.
Renamed test suite to be consistent with the pattern
test_[component].tif.
Added a function pygeoprocessing.routing.extract_streams_mfd that
creates a contiguous stream layer raster to accounts for the divergent flow
that can occur with multiple flow direction. If the flow direction raster is
otherwise directly thresholded, small disjoint streams can appear where
the downstream flow drops below the threshold level.
Fixed an issue that could cause some custom arguments to geotiff creation
options to be ignored.
Added a mask_raster function that can be used to mask out pixels in
an existing raster that don’t overlap with a given vector.
Fixed a bug in the distance_transform_edt function that would cause
incorrect distances to be calculated in the case of nodata pixels in the
region raster. The algorithm has been modified to treat nodata as though
pixel values were 0 (non-region) and the distance transform will be defined
for the entire raster.
Added a sampling_distance parameter to distance_transform_edt that
linearly scales the distance transform by this value.
Fixed an issue in calculate_slope that would raise an exception if the
input dem did not have a nodata value defined.
Changed the behavior of zonal_statistics for polygons that that do not
intersect any pixels. These FIDs are now also included in the result from
zonal_statistics where previously they were absent. This is to remain
consistent with how other GIS libraries calculate zonal stats.



1.4.1 (2018-11-12)

Hotfix that fixes an issue that would cause zonal_statistics to crash if
a polygon were outside of the raster’s bounding box.



1.4.0 (2018-11-12)

Adding error checking to ensure that target_pixel_size passed to
warp_raster and align_and_resize_raster_stack are validated to ensure
they are in the correct format. This solves an issue where an incorrect
value, such as a single numerical value, resolve into readable exception
messages.
Added a gdal_warp_options parameter to align_and_resize_raster_stack
and warp_raster whose contents get passed to gdal.Warp’s warpOptions
parameter. This was implemented to expose the CUTLINE_TOUCH_ALL
functionality but could be used for any gdal functionality.
Modified rasterize API call to make burn_values and option_list
both optional parameters, along with error checking to ensure a bad input’s
behavior is understood.
Exposing GeoTIFF creation options for all the pygeoprocessing.routing
functions which create rasters. This is consistent with the creation
options exposed in the main pygeoprocessing API.
Removing 'mean_pixel_size' as a return value from get_raster_info,
this is because this parameter is easily misused and easily calculated if
needed. This is a “What good programmers need, not what bad programmers
want.” feature.



1.3.1 (2018-10-25)

Hotfix to patch an infinite loop when aggregating upstream or downstream
with custom rasters.



1.3.0 (2018-10-25)

Fixed a handful of docstring errors.
Improved runtime of zonal_statistics by a couple of orders of magnitude
for large vectors by using spatial indexes when calculating disjoint polygon
overlap sets, using database transactions, and memory buffers.
Improved runtime performance of reproject_vector by using database
transactions.
Improved logging for long runtimes in zonal_statistics.
Changed zonal_statistics API and functionality to aggregate across the
FIDs of the aggregate vector. This is to be consistent with QGIS and other
zonal statistics functionality. Additionally, fixed a bug where very small
polygons might not get aggregated if they lie in the same pixel as another
polygon that does not intersect it. The algorithm now runs in two passes:


aggregate pixels whose centers intersect the aggregate polygons
any polygons that were not aggregated are geometrically intersected
with pixels to determine coverage.



Removed the calculate_raster_stats function since it duplicates GDAL
functionality, but with a slower runtime, and now functions in
pygeoprocessing that create rasters also calculate stats on the fly if
desired.
Fixes an issue in get_raster_info and get_vector_info where the path
to the raster/vector includes non-standard OS pathing (such as a NETCDF),
info will still calculate info.
Added functionality to align_raster_stack and warp_raster to define
a base spatial reference system for rasters if not is not defined or one
wishes to override the existing one. This functionality is useful when
reprojecting a rasters that does not have a spatial reference defined in the
dataset but is otherwise known.
Added a weight_raster_path_band parameter to both
flow_accumulation_d8 and flow_accumulation_mfd that allows the
caller to use per-pixel weights from a parallel raster as opposed to
assuming a weight of 1 per pixel.
Added a weight_raster_path_band parameter to both
distance_to_channel_mfd and distance_to_channel_d8 that allows the
caller to use per-pixel weights from a parallel raster as opposed to
assuming a distance of 1 between neighboring pixels or sqrt(2) between
diagonal ones.
Added an option to reproject_vector that allows a caller to specify
which fields, if any, to copy to the target vector after reprojection.
Adding a check in align_and_resize_raster_stack for duplicate target
output paths to avoid problems where multiple rasters are being warped to
the same path.
Created a public merge_bounding_box_list function that’s useful for
union or intersection of bounding boxes consistent with the format in
PyGeoprocessing.
Added functionality in align_and_resize_raster_stack and warp_raster
to use a vector to mask out pixel values that lie outside of the polygon
coverage area. This parameter is called vector_mask_options and is
fully documented in both functions. It is similar to the cutline
functionality provided in gdal.Warp.
Fixed an issue in the flow_accumulation_* functions where a weight
raster whose values were equal to the nodata value of the flow accumulation
raster OR simply nodata would cause infinite loops.



1.2.3 (2018-07-25)

Exposing a parameter and setting reasonable defaults for the number of
processes to allocate to convolve_2d and warp_raster. Fixes an issue
where the number of processes could exponentiate if many processes were
calling these functions.
Fixing an issue on zonal_statistics and convolve_2d that would
attempt to both read and write to the target raster with two different GDAL
objects. This caused an issue on Linux where the read file was not caught up
with the written one. Refactored to use only one handle.
Fixing a rare race condition where an exception could occur in
raster_calculator that would be obscured by an access to an object that
had not yet been assigned.
align_and_resize_raster_stack now terminates its process pool.
Increased the timeout in joining raster_calculator’s stats worker.
On a slow system 5 seconds was not quite enough time.



1.2.2 (2018-07-25)

Hotfixed a bug that would cause numpy arrays to be treated as broadcastable
even if they were passed in “raw”.



1.2.1 (2018-07-22)

Fixing an issue with warp_raster that would round off bounding boxes
for rasters that did not fit perfectly into the target raster’s provided
pixel size.
Cautiously joining all process pools to avoid a potential bug where a
deamonized subprocess in a process pool may still have access to a raster
but another process may require write access to it.



1.2.0 (2018-07-19)

Several PyGeoprocessing functions now take advantage of multiple CPU cores:

raster_calculator uses a separate thread to calculate raster
statistics in a nogil section of Cython code. In timing with a big
rasters we saw performance improvements of about 35%.
align_and_resize_raster_stack uses as many CPU cores, up to the number
of CPUs reported by multiprocessing.cpu_count (but no less than 1), to
process each raster warp while also accounting for the fact that
gdal.Warp uses 2 cores on its own.
warp_raster now directly uses gdal.Warp’s multithreading directly.
In practice it seems to utilize two cores.
convolve_2d attempts to use multiprocessing.cpu_count cpus to
calculate separable convolutions per block while using the main thread to
aggregate and write the result to the target raster. In practice we saw
this improve runtimes by about 50% for large rasters.


Fixed a bug that caused some nodata values to not be treated as nodata
if there was a numerical roundoff.
A recent GDAL upgrade (might have been 2.0?) changed the reference to
nearest neighbor interpolation from ‘nearest’ to ‘near’. This PR changes
PyGeoprocessing to be consistent with that change.
raster_calculator can now also take “raw” arguments in the form of a
(value, “raw”) tuple. The parameter value will be passed directly to
local_op. Scalars are no longer a special case and need to be passed as
“raw” parameters.
Raising ValueError in get_raster_info and get_vector_info in
cases where non-filepath non-GIS values are passed as parameters. Previously
such an error would result in an unhelpful error in the GDAL library.



1.1.0 (2018-07-06)

PyGeoprocessing now supports Python 2 and 3, and is tested on python 2.7
and 3.6 Testing across multiple versions is configured to be run via
tox.
After testing (tox configuration included under tox-libcompat.ini),
numpy requirement has been dropped to numpy>=1.10.0 and scipy has been
modified to be scipy>=0.14.1,!=0.19.1.
A dependency on future has been added for compatibility between python
versions.
Fixed a crash in pygeoprocessing.routing.flow_dir_mfd and
flow_dir_d8 if a base raster was passed in that did not have a power of
two blocksize.
raster_calculator can now take numpy arrays and scalar values along with
raster path band tuples. Arrays and scalars are broadcast to the raster size
according to numpy array broadcasting rules.
align_and_resize_raster_stack can now take a desired target projection
which causes all input rasters to be warped to that projection on output.



1.0.1 (2018-05-16)

Hotfix patch to remove upper bound on required numpy version. This was
causing a conflict with InVEST’s looser requirement. Requirement is now
set to >=1.13.0.



1.0.0 (2018-04-29)

This release marks a feature-complete version of PyGeoprocessing with a
full suite of routing and geoprocessing capabilities.
pygeoprocessing.routing module has a flow_dir_mfd function that
calculates a 32 bit multiple flow direction raster.
pygeoprocessing.routing module has a flow_accumulation_mfd function
that uses the flow direction raster from
pygeoprocessing.routing.flow_dir_mfd to calculate a per-pixel continuous
flow accumulation raster.
pygeoprocessing.routing module has a distance_to_channel_mfd
function that calculates distance to a channel raster given a
pygeoprocessing MFD raster.
pygeoprocessing.routing module has a distance_to_channel_d8 function
that calculates distance to a channel raster given a pygeoprocessing D8
raster.



0.7.0 (2018-04-18)

Versioning is now handled by setuptools_scm rather than
natcap.versioner. pygeoprocessing.__version__ is now fetched from
the package metadata.
Raster creation defaults now set “COMPRESS=LZW” for all rasters created in
PyGeoprocessing, including internal temporary rasters. This option was
chosen after profiling large raster creation runs on platter hard drives.
In many cases processing time was dominated by several orders of magnitude
as a write-to-disk. When compression is turned on overall runtime of very
large rasters is significantly reduced. Note this otherwise increases the
runtime small raster creation and processing by a small amount.

pygeoprocessing.routing module now has a fill_pits, function which
fills hydrological pits with a focus on runtime efficiency, memory space
efficiency, and cache locality.



pygeoprocessing.routing module has a flow_dir_d8 that uses largest
slope to determine the downhill flow direction.
pygeoprocessing.routing module has a flow_accumulation_d8 that uses
a pygeoprocessing D8 flow direction raster to calculate per-pixel flow
accumulation.
Added a merge_rasters function to pygeoprocessing that will mosaic a
set of rasters in the same projection, pixel size, and band count.



0.6.0 (2017-01-10)

Added an optional parameter to iterblocks to allow the largest_block
to be set something other than the PyGeoprocessing default. This in turn
allows the largest_block parameter in raster_calculator to be passed
through to iterblocks.
Upgraded PyGeoprocessing GDAL dependency to >=2.0.
Added a working_dir optional parameter to zonal_statistics,
distance_transform_edt, and convolve_2d which specifies a directory
in which temporary files will be created during execution of the function.
If set to None files are created in the default system temporary
directory.



0.5.0 (2017-09-14)

Fixed an issue where NETCDF files incorrectly raised Exceptions in
raster_calculator and rasterize because they aren’t filepaths.
Added a NullHandler so that users wouldn’t get an error that a logger
handler was undefined.
Added ignore_nodata, mask_nodata, and normalize_kernel options
to convolve_2d which make this function capable of adapting the nodata
overlap with the kernel rather than zero out the result, as well as on
the fly normalization of the kernel for weighted averaging purposes. This
is in part to make this functionality more consistent with ArcGIS’s
spatial filters.



0.4.4 (2017-08-18)

When testing for raster alignment raster_calculator no longer checks the
string equality for projections or geotransforms. Instead it only checks
raster size equality. This fixes issues where users rasters DO align, but
have a slightly different text format of the WKT of projection. It also
abstracts the problem of georeferencing away from raster_calculator that is
only a grid based operation.



0.4.3 (2017-08-16)

Changed the error message in reclassify_raster so it’s more informative
about how many values are missing and the values in the input lookup table.
Added an optional parameter target_nodata to convolve_2d to set the
desired target nodata value.



0.4.2 (2017-06-20)

Hotfix to fix an issue with iterblocks that would return signed values
on unsigned raster types.
Hotfix to correctly cite Natural Capital Project partners in license and
update the copyright year.
Hotfix to patch an issue that gave incorrect results in many PyGeoprocessing
functions when a raster was passed with an NoData value. In these cases the
internal raster block masks would blindly pass through on the first row
since a test for numpy.ndarray == None is False and later
x[False] is the equivalent of indexing the first row of the array.



0.4.1 (2017-06-19)

Non-backwards compatible refactor of core PyGeoprocessing geoprocessing
pipeline. This is to in part expose only orthogonal functionality, address
runtime complexity issues, and follow more conventional GIS naming
conventions. Changes include:


Full test coverage for pygeoprocessing.geoprocessing module
Dropping “uri” moniker in lieu of “path”.
If a raster path is specified and operation requires a single band,
argument is passed as a “(path, band)” tuple where the band index starts
at 1 as convention for raster bands.
Shapefile paths are assumed to operate on the first layer. It is so
rare for a shapefile to have more than one layer, functions that would
be confused by multiple layers have a layer_index that defaults to 0
that can be overridden in the call.
Be careful, many of the parameter orders have been changed and renamed.
Generally inputs come first, outputs last. Input parameters are
often prefixed with “base_” while output parameters are prefixed with
“target_”.
Functions that take rasters as inputs must have their rasters aligned
before the call to that function. The function
align_and_resize_raster_stack can handle this.
vectorize_datasets refactored to raster_calculator since that
name is often used as a convention when referring to raster
calculations.
vectorize_points refactored to meaningful interpolate_points.
aggregate_by_shapefile refactored to zonal_statistics and now
returns a dictionary rather than a named tuple.
All functions that create rasters expose the underlying GeoTIFF options
through a default parameter gtiff_creation_options which default to
“(‘TILED=YES’, ‘BIGTIFF=IF_SAFER’)”.
Individual functions for raster and vector properties have been
aggregated into get_raster_info and get_vector_info
respectively.
Introducing warp_raster to wrap GDAL’s ReprojectImage
functionality that also works on bounding box clips.
Removed the temporary_filename() paradigm. Users should manage
temporary filenames directly.
Numerous API changes from the 0.3.x version of PyGeoprocessing.



Fixing an issue with aggregate_raster_values that caused a crash if feature
IDs were not in increasing order starting with 0.
Removed “create_rat/create_rat_uri” and migrated it to
natcap.invest.wind_energy; the only InVEST model that uses that function.
Fixing an issue with aggregate_raster_values that caused a crash if feature
IDs were not in increasing order starting with 0.
Removed “create_rat/create_rat_uri” and migrated it to
natcap.invest.wind_energy; the only InVEST model that uses that function.



0.3.3 (2017-02-09)

Fixing a memory leak with large polygons when calculating disjoint set.



0.3.2 (2017-01-24)

Hotfix to patch an issue with watershed delineation packing that causes some
field values to lose precision due to default field widths being set.



0.3.1 (2017-01-18)

Hotfix patch to address an issue in watershed delineation that doesn’t pack
the target watershed output file. Half the shapefile consists of features
polygonalized around nodata values that are flagged for deletion, but not
removed from the file. This patch packs those features and returns a clean
watershed.



0.3.0 (2016-10-21)

Added rel_tol and abs_tol parameters to testing.assertions to be
consistent with PEP485 and deal with real world testing situations that
required an absolute tolerance.
Removed calls to logging.basicConfig throughout pygeoprocessing. Client
applications may need to adjust their logging if pygeoprocessing’s log
messages are desired.
Added a flag to aggregate_raster_values_uri that can be used to
indicate incoming polygons do not overlap, or the user does not care about
overlap. This can be used in cases where there is a computational or memory
bottleneck in calculating the polygon disjoint sets that would ultimately be
unnecessary if it is known a priori that such a check is unnecessary.
Fixed an issue where in some cases different nodata values for ‘signal’ and
‘kernel’ would cause incorrect convolution results in convolve_2d_uri.
Added functionality to pygeoprocessing.iterblocks to iterate over
largest memory aligned block that fits into the number of elements provided
by the parameter. With default parameters, this uses a ceiling around 16MB
of memory per band.
Added functionality to pygeoprocessing.iterblocks to return only the
offset dictionary. This functionality would be used in cases where memory
aligned writes are desired without first reading arrays from the band.
Refactored pygeoprocessing.convolve_2d_uri to use iterblocks to take
advantage of large block sizes for FFT summing window method.
Refactoring source side to migrate source files from [REPO]/pygeoprocessing
to [REPO]/src/pygeoprocessing.
Adding a pavement script with routines to fetch SVN test data, build a
virtual environment, and clean the environment in a Windows based operating
system.
Adding transform_bounding_box to calculate the largest projected
bounding box given the four corners on a local coordinate system.
Removing GDAL, Shapely from the hard requirements in setup.py. This will
allow pygeoprocessing to be built by package managers like pip without these
two packages being installed. GDAL and Shapely will still need to be
installed for pygeoprocessing to run as expected.
Fixed a defect in pygeoprocessing.testing.assert_checksums_equal
preventing BSD-style checksum files from being analyzed correctly.
Fixed an issue in reclassify_dataset_uri that would cause an exception if
the incoming raster didn’t have a nodata value defined.
Fixed a defect in pygeoprocessing.geoprocessing.get_lookup_from_csv
where the dialect was unable to be detected when analyzing a CSV that was
larger than 1K in size. This fix enables the correct detection of comma or
semicolon delimited CSV files, so long as the header row by itself is not
larger than 1K.
Intra-package imports are now relative. Addresses an import issue for users
with multiple copies of pygeoprocessing installed across multiple Python
installations.
Exposed cython routing functions so they may be imported from C modules.
get_lookup_from_csv attempts to determine the dialect of the CSV instead
of assuming comma delimited.
Added relative numerical tolerance parameters to the PyGeoprocessing raster
and csv tests with in the same API style as numpy.testing.allclose.
Fixed an incomparability with GDAL 1.11.3 bindings that expects a boolean
type in band.ComputeStatistics. Before this fix PyGeoprocessing would
crash with a TypeError on many operations.
Fixed a defect in pygeoprocessing.routing.calculate_transport where the
nodata types were cast as int even though the base type of the routing
rasters were floats. In extreme cases this could cause a crash on a type
that could not be converted to an int, like an inf, and in subtle cases
this would result in nodata values in the raster being ignored during
routing.
Added functions to construct raster and vectors on disk from reasonable
datatypes (numpy matrices for rasters, lists of Shapely geometries for
vectors).
Fixed an issue where reproject_datasource_uri would add geometry that
couldn’t be projected directly into the output datasource. Function now
only adds geometries that transformed without error and reports if any
features failed to transform.
Added file flushing and dataset swig deletion in reproject_datasource_uri to
handle a race condition that might have been occurring.
Fixed an issue when “None” was passed in on new raster creation that would
attempt to directly set that value as the nodata value in the raster.
Added basic filetype-specific assertions for many geospatial filetypes, and
tests for these assertions. These assertions are exposed in
pygeoprocessing.testing.
Pygeoprocessing package tests can be run by invoking
python setup.py nosetests. A subset of tests may also be run from an
installed pygeoprocessing distribution by calling
pygeoprocessing.test().
Fixed an issue with reclassify dataset that would occur when small rasters
whose first memory block would extend beyond the size of the raster thus
passing in “0” values in the out of bounds area. Reclassify dataset
identified these as valid pixels, even though vectorize_datsets would mask
them out later. Now vectorize_datasets only passes memory blocks that
contain valid pixel data to its kernel op.
Added support for very small AOIs that result in rasters less than a pixel
wide. Additionally an all_touched flag was added to allow the
ALL_TOUCHED=TRUE option to be passed to RasterizeLayer in the AOI mask
calculation.
Added watershed delineation routine to
pygeoprocessing.routing.delineate_watershed. Operates on a DEM and point
shapefile, optionally snaps outlet points to nearest stream as defined by a
thresholded flow accumulation raster and copies the outlet point fields into
the constructed watershed shapefile.
Fixing a memory leak in block caches that held on to dataset, band, and
block references even after the object was destroyed.
Add an option to route_flux that lets the current pixel’s source be included
in the flux, or not. Previous version would include on the source no matter
what.
Now using natcap.versioner for versioning instead of local versioning logic.



0.2.2 (2015-05-07)

Adding MinGW-specific compiler flags for statically linking pygeoprocessing
binaries against libstdc++ and libgcc. Fixes an issue on many user’s
computers when installing from a wheel on the Python Package Index without
having two needed DLLs on the PATH, resulting in an ImportError on pygeoprocessing.geoprocessing_core.pyd.
Fixing an issue with versioning where ‘dev’ was displayed instead of the
version recorded in pygeoprocessing/__init__.py.
Adding all pygeoprocessing.geoprocessing functions to
pygeoprocessing.__all__, which allows those functions to appear when
calling help(pygeoprocessing).
Adding routing_core.pxd to the manifest. This fixes an issue where some
users were unable to compiler pygeoprocessing from source.



0.2.1 (2015-04-23)

Fixed a bug on the test that determines if a raster should be memory
blocked. Rasters were not getting square blocked if the memory block was
row aligned. Now creates 256x256 blocks on rasters larger than 256x256.
Updates to reclassify_dataset_uri to use numpy.digitize rather than Python
loops across the number of keys.
More informative error messages raised on incorrect bounding box mode.
Updated docstring on get_lookup_from_table to indicate the headers are case
insensitive.
Added updates to align dataset list that report which dataset is being
aligned. This is helpful for logging feedback when many datasets are passed
in that don’t take long enough to get a report from the underlying reproject
dataset function.
pygeoprocessing.routing.routing_core includes pxd to be cimportable
from a Cython module.



0.2.0 (2015-04-14)

Fixed a library wide issue relating to the underlying numpy types of
GDT_Byte Datasets. Now correctly identify the signed and unsigned versions
and removed all instances where code used to mod byte data to unsigned data
and correctly creates signed/unsigned byte datasets during resampling.
Removed extract_band_and_nodata function since it exposes the underlying
GDAL types.
Removed reclassify_by_dictionary since reclassify_dataset_uri provided
almost the same functionality and was widely used.
Removed the class OrderedDict that was not used.
Removed the function calculate_value_not_in_dataset since it loaded the
entire dataset into memory and was not useful.



0.1.8 (2015-04-13)

Fixed an issue on reclassifying signed byte rasters that had negative nodata
values but the internal type stored for vectorize datasets was unsigned.



0.1.7 (2015-04-02)

Package logger objects are now identified by python hierarchical package
paths (e.g. pygeoprocessing.routing)
Fixed an issue where rasters that had undefined nodata values caused
striping in the reclassify_dataset_uri function.



0.1.6 (2015-03-24)

Fixing LICENSE.TXT to .txt issue that keeps reoccurring.



0.1.5 (2015-03-16)

Fixed an issue where int32 dems with INT_MIN as the nodata value were being
treated as real DEM values because of an internal cast to a float for the
nodata type, but a cast to double for the DEM values.
Fixed an issue where flat regions, such as reservoirs, that could only drain
off the edge of the DEM now correctly drain as opposed to having undefined
flow directions.



0.1.4 (2015-03-13)

Fixed a memory issue for DEMs on the order of 25k X 25k, still may have
issues with larger DEMs.



0.1.3 (2015-03-08)

Fixed an issue so tox correctly executes on the repository.
Created a history file to document current and previous releases.
Created an informative README.rst.



0.1.2 (2015-03-04)

Fixing issue that caused “LICENSE.TXT not found” during pip install.



0.1.1 (2015-03-04)

Fixing issue with automatic versioning scheme.



0.1.0 (2015-02-26)

First release on PyPI.