GitLocker: The Coding Marketplace

Description:

pythonipmi 0.5.5

Features

native RMCP interface
legacy RMCP interface (using ipmitool as backend)
RMCP+ interface (using ipmitool as backend)
system (KCS) interface (using ipmitool as backend)
IPMB interface using the Total Phase Aardvark
IPMB interface using ipmb-dev driver on Linux

Tested Devices

Kontron mTCA Carrier Manager
Kontron CompactPCI boards
Pigeon Point Shelf Manager
HPE iLO3/iLO4
N.A.T. NAT-MCH
DESY MMC STAMP & related AMCs (DAMC-FMC2ZUP, DAMC-FMC1Z7IO)

Requirements
For IPMB interface a Total Phase Aardvark is needed.
Another option is to use ipmb-dev driver on Linux with an I2C bus, driver of which supports slave mode:
https://www.kernel.org/doc/html/latest/driver-api/ipmb.html
For legacy RMCP, RMCP+ and system interface (KCS) the installtion of ipmitool
is required.

Installation

Using pip
The recommended installation method is using
pip:
pip install python-ipmi

Manual installation
Download the source distribution package for the library. Extract the the package to
a temporary location and install:
python setup.py install

Documentation
You can find the most up to date documentation at:
http://python-ipmi.rtfd.org

Example
Below is an example that shows how to setup the interface and the connection
using the ipmitool as backend with both network and serial interfaces.
Example with lan interface:
import pyipmi
import pyipmi.interfaces

# Supported interface_types for ipmitool are: 'lan' , 'lanplus', and 'serial-terminal'
interface = pyipmi.interfaces.create_interface('ipmitool', interface_type='lan')

connection = pyipmi.create_connection(interface)

connection.target = pyipmi.Target(0x82)
connection.target.set_routing([(0x81,0x20,0),(0x20,0x82,7)])

connection.session.set_session_type_rmcp('10.0.0.1', port=623)
connection.session.set_auth_type_user('admin', 'admin')
connection.session.establish()

connection.get_device_id()
ipmitool command:
ipmitool -I lan -H 10.0.0.1 -p 623 -U "admin" -P "admin" -t 0x82 -b 0 -l 0 raw 0x06 0x01
Example with serial interface:
import pyipmi
import pyipmi.interfaces

interface = pyipmi.interfaces.create_interface('ipmitool', interface_type='serial-terminal')

connection = pyipmi.create_connection(interface)

connection.target = pyipmi.Target(0xb2)

# set_session_type_serial(port, baudrate)
connection.session.set_session_type_serial('/dev/tty2', 115200)
connection.session.establish()

connection.get_device_id()
ipmitool command:
ipmitool -I serial-terminal -D /dev/tty2:115200 -t 0xb2 -l 0 raw 0x06 0x01

Compatibility
Python > 3.6 is currently supported. Python 2.x is deprecated.

Contributing
Contributions are always welcome. You may send patches directly (eg. git send-email), do a github pull request or just file an issue.

respect the coding style (eg. PEP8),
provide well-formed commit message (see this blog post.)
add a Signed-off-by line (eg. git commit -s)

License
This library is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or (at
your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License
along with this library; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA