ratelimitingfilter 1.5

Description:

ratelimitingfilter 1.5

The RateLimitingFilter is a filter for the Python logging system
that allows you to restrict the rate at which messages can pass through
your logging handlers.
The filter can be useful if you’re using a handler such as Python’s
logging.handlers.SMTPHandler to send error notification emails.
Error notification emails provide a useful means of keeping an eye on
the health of a running system, but these emails have the potential to
overload a mailbox if they start arriving in quick succession due to
some kind of critical failure.
The RateLimitingFilter can help prevent mailbox overload by
throttling messages based on a configurable rate, whilst allowing for
periodic bursts of messages which can be a useful indicator that
something somewhere has broken.

Compatibility

Python 2.7, 3.4+



Installing
$ pip install ratelimitingfilter
or
$ git clone https://github.com/wkeeling/ratelimitingfilter.git
$ cd ratelimitingfilter
$ python setup.py install


Usage
You can rate-limit a logging handler simply by creating a new instance of the
RateLimitingFilter and adding it to the handler:
from ratelimitingfilter import RateLimitingFilter

...

ratelimit = RateLimitingFilter()
handler.addFilter(ratelimit)
Creating an instance of the RateLimitingFilter without any arguments
like in the example above will restrict the flow of messages to 1 every
30 seconds.
You can customize the flow rate by supplying your own values for the
rate, per and burst attributes. For example, to allow a rate
of 1 message every 2 minutes with a periodic burst of up to 5 messages:
ratelimit = RateLimitingFilter(rate=1, per=120, burst=5)
handler.addFilter(ratelimit)

SMTPHandler Example
A typical use case may be to throttle error notification emails sent by
the logging.handlers.SMTPHandler.
Here’s an example of how you might set that up:
import logging.handlers
import time

from ratelimitingfilter import RateLimitingFilter

logger = logging.getLogger('throttled_smtp_example')

# Create an SMTPHandler
smtp = logging.handlers.SMTPHandler(
mailhost='smtp.example.com',
fromaddr='[email protected]',
toaddrs='[email protected]',
subject='An error has occurred'
)
smtp.setLevel(logging.ERROR)

# Create a formatter and set it on the handler
formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s')
smtp.setFormatter(formatter)

# Create an instance of the RateLimitingFilter, and add it to the handler
ratelimit = RateLimitingFilter()
smtp.addFilter(ratelimit)

# Add the handler to the logger
logger.addHandler(smtp)

# Logged errors will now be restricted to 1 every 30 seconds
while True:
logger.error('An error message')
time.sleep(2)



Advanced Usage
It is possible to pass some additional configuration options to the
RateLimitingFilter initializer for further control over message
throttling.
Perhaps you want to selectively throttle particular error messages
whilst allowing other messages to pass through freely. This might be the
case if there is part of the application which you know can generate
large volumes of errors, whilst the rest of the application is unlikely
to.
One way to achieve this might be to use separate loggers, one configured
with rate limiting, one without, for the different parts of the
application. Alternatively, you can use a single logger and configure
the RateLimitingFilter to match only those messages that you want to
throttle.
Applying selective rate limiting allows for constant visbility of lower
volume errors whilst keeping the higher volume errors in check.
The RateLimitingFilter supports two ways to selectively throttle
messages:

Substring based message throttling
You can pass a list of substrings to the RateLimitingFilter which it
will use to match messages to apply to.
config = {'match': ['some error', 'a different error']}

ratelimit = RateLimitingFilter(rate=1, per=60, burst=1, **config)
smtp.addFilter(ratelimit)

# Can be rate limited
logger.error('some error occurred')

# Can be rate limited
logger.error('a different error occurred')

# Will not be rate limited
logger.error('something completely different happened')


Automatic message throttling
This is an experimental feature.
You can let the RateLimitingFilter automatically throttle messages
by setting the match option to auto.
config = {'match': 'auto'}
ratelimit = RateLimitingFilter(rate=1, per=60, burst=1, **config)
The filter will then attempt to identify messages based on their content
in order to figure out whether to throttle them or not. It will tolerate
slight differences in content when identifying messages. So for example,
if error messages are being rapidly logged that are the same apart from
a timestamp, or perhaps an incrementing id, then these messages will be
treated as the same as far as rate limiting is concerned.



License
MIT


Contributing
Feedback and improvements are more than welcome. Please submit a pull
request!
https://github.com/wkeeling/ratelimitingfilter