rcsb.app.file 1.3.2

Description:

rcsb.app.file 1.3.2

RCSB File Access API Application
A FastAPI File Access Service Application
Installation
Installation is via the program pip.
pip3 install rcsb.app.file


Or, download the library source software from the project repository:
git clone https://github.com/rcsb/py-rcsb_app_file.git


then install from the local repository directory:
pip3 install .


Configuration
The only file to configure should be config.yml, with the exception of the example HTML files.
Edit variables in rcsb/app/config/config.yml.
In particular, edit paths (REPOSITORY_DIR_PATH, SHARED_LOCK_PATH, SESSION_DIR_PATH).
For production, they should point to a remote path on a mounted file system.
For testing, they may point to local paths.
Also edit SERVER_HOST_AND_PORT.
Determine the appropriate settings for the server.
Please note that the client will require a different address than the server, so config.yml will require different settings on each.
For example, client - 100.200.300.400:8000, server - 0.0.0.0:8000.
Please note that a proxy server such as nginx may not work from the browser due to a conflict with the CORS middleware in main.py.
The example HTML files (example-upload.html, example-download.html, and example-list.html) must be configured independently.
The relevant variables should be at the top of the files.
In particular, edit url variables to match server url.
Quick start
On server
If server has a proxy server like nginx, stop the server.
service nginx stop

Clone the repository and install dependencies, then install Redis.
git clone https://github.com/rcsb/py-rcsb_app_file
apt install docker.io
apt install redis-tools
docker run --name redis-container -d redis

In project file py-rcsb_app_file/rcsb/app/config/config.yml,


If you have a mounted file system for deposits, change _PATH variables to appropriate paths.


Change KV_MODE to redis.


Change REDIS_HOST to redis.


Change LOCK_TYPE to redis.


Navigate to folder py-rcsb_app_file, then build and start the project.
docker build -t fileapp -f Dockerfile.stage .
# run and output to stdout
docker run --name fileapp -p 8000:8000 --link redis-container:redis fileapp
# or run in background and write to a log file
docker run --name fileapp -p 8000:8000 --link redis-container:redis fileapp > log.txt 2>&1 &
# to add a mounted file system
docker run --mount type=bind,source=/path/to/file/system,target=/path/to/file/system --name fileapp -p 8000:8000 --link redis-container:redis fileapp

To stop the container
docker stop fileapp

On client
git clone https://github.com/rcsb/py-rcsb_app_file

In project file py-rcsb_app_file/rcsb/app/config/config.yml

Change SERVER_HOST_AND_PORT to http : // address.of.the.server:8000 (spaces added for readability)

Navigate to folder py-rcsb_app_file, then install and start the client.
pip3 install .
python3 -m rcsb.app.client.front-end.gui

Verify the connection, then test uploading, downloading, and listing of files.
Endpoints and forwarding
To view documentation, run a server, then visit localhost:port_number/docs.
The repository has one upload endpoint, one download endpoint, and one list-directory endpoint, among others.
To upload a file in chunks, use the '/upload' endpoint.
To upload the entire file in one request, set the chunk size parameter equal to the file size.
Upload requires some setup by invoking the '/getUploadParameters' endpoint first, then passing the results as parameters.
To maintain sequential order, the client must wait for each response before sending the next chunk.
The repository saves chunks to a temporary file that is named after the upload id and begins with "._" which is configurable from the getTempFilePath function in Sessions.py.
The download endpoint is found at '/download'.
The list directory endpoint is found at '/list-dir'.
To skip endpoints and forward a server-side chunk or file from Python, use functions in various Utility or Provider files.
Those functions may throw a fastapi.HTTPException, so you will have to enclose function calls in a try except block.
Uploads and downloads
HTML examples
The example-upload.html, example-download.html, and example-list.html files demonstrate requests to the endpoints from HTML.
Python client
In a separate shell (also from the base repository directory) run client.py or gui.py
Gui.py is launched from the shell
Client.py usage

python3 client.py
[-h (help)]
[--upload source_file repo_type id content_type milestone part format version]
[--download target_folder repo_type id content_type milestone part format version]
[--list repo_type dep_id (list directory)]
[--copy repo1 depid1 type1 milestone1 part1 format1 version1 repo2 depid2 type2 milestone2 part2 format2 version2]
[--move repo1 depid1 type1 milestone1 part1 format1 version1 repo2 depid2 type2 milestone2 part2 format2 version2]
[-r (chunk file resumably)]
[-o (overwrite files with same name)]
[-z (zip files prior to upload)]
[-x (expand files after upload)]
[-g (compress chunks)]
[-n (no chunking)]

Hashing and compression
Compression of file

Should hashing be performed before or after compression/decompression? The API performs hashing on the compressed file.
For the Python client, from the client side, the API first compresses, then hashes the complete file, then uploads. From the server side, the API saves, then hashes the complete file, then decompresses.
From javascript, hashing libraries are less reliable, so hashing is optional. If a hash digest is not sent as a parameter, the API defaults to file size comparison.
File size is computed on the compressed file, same as the hash. Please ensure that front-end scripts compute file size in the correct order if compression is used.

Compression of chunks

When uploading, if the extractChunks parameter is set to True, the API assumes that you have compressed each chunk.
It therefore decompresses each chunk on receiving it.
The compression type is set in rcsb/app/config/config.yml.
Client-side compression is presently only available from the example Python clients.
The example HTML files do not have compression since compression frameworks from the browser are less developed.
If you add compression from the browser for compression of chunks, ensure that the compression type matches that specified in config.yml.
Hashing results are not affected by compression/decompression of chunks.

Testing
If you don't have Redis on your local machine, testing is still possible with a Sqlite database.
Run test suite (Python 3.9) using
setuptools or
tox:
python3 setup.py test

or simply run

tox

Deployment
To synchronize transactions on multiple servers or containers requires a remote Redis server (do not connect to Redis with 'localhost').
For production, we presume that the file system is a mounted file system.
A Docker container should be used.
To enable scale-up to multiple containers, the file system and database should be installed outside the container.
Set paths in config.yml so that all containers coordinate through the same paths.
Note that Docker requires parameters to bind the paths (refer to examples).
If both Docker and Redis are used, it runs best when Redis is also in a (separate) Docker container (refer to examples).
Some sites could use multiple deposition servers, a situation comparable to multiple containers.
As with containers, multiple servers will require all servers to coordinate through a single remote file system and database.
A proxy server such as nginx may not be compatible with HTML uploads due to CORS policy, though Python should work.
Please find an appropriate gunicorn server configuration rather than using a proxy server.
Deployment on local server without docker
For launching without docker, edit url in deploy/LAUNCH_GUNICORN.sh
From base repository directory (in py-rcsb_app_file/), start app with:
./deploy/LAUNCH_GUNICORN.sh

or

nohup ./deploy/LAUNCH_GUNICORN.sh > /dev/null 2>&1 &

Database
The database is used for resumable uploads (if resumable = true) and file locking (if lock type is set to redis).
When uploading resumable chunks, server processes coordinate through a database named KV (key-value)
The value of KV_MODE in config.yml determines whether the database is Redis or Sqlite3.
A variety of lock modules have been provided, where RedisLock uses a database and the others coordinate through files.
Sqlite3
Sqlite is provided just for testing.
As configured, Sqlite will only work when the app runs on a single server and the file system and database are also stored on that server.
If KV_MODE is set to sqlite in rcsb/app/config/config.yml, chunk information is coordinated with a sqlite3 database
To view or remove Sqlite variables
Find KV_FILE_PATH in rcsb/app/config/config.yml
Connect to sqlite and use SQL commands, then ctrl-d to exit

sqlite3 path/to/kv.sqlite
.table
select * from sessions;
select * from map;


However, if files API is running in Docker, sqlite will not save to path specified in config.yml
Instead, to view or remove Sqlite variables, find kv.sqlite with
find / -name kv.sqlite

Redis
If KV_MODE is set to redis in rcsb/app/config/config.yml, resumable chunks coordinate through a Redis database
Install Redis
apt install redis
apt install redis-server
apt install redis-tools

Start the Redis server
/usr/bin/redis-server (preferred)
or
service redis start

To test Redis
redis-cli
ping
(should respond PONG)

To stop Redis
redis-cli
shutdown
(or service redis stop, but not if Redis was started with /usr/bin/redis-server)

To view Redis variables

redis-cli
KEYS * (prints two values)
GET keyname (for keyname, copy/paste the first value)
HGETALL hashkey (for hashkey, copy/paste the second value)
exit


To remove all variables

redis-cli
FLUSHALL
exit


Redis on same machine as files API and without Redis in Docker
Change Redis host to 'localhost' in rcsb/app/config/config.yml, then save.

self.kV = redis.Redis(host='localhost', decode_responses=True)


Then, from the base directory, reinstall with pip3

pip3 install .


Connecting to Redis remotely
If Redis runs on a different machine than the files API, then the host must be set to a url
Change Redis host to '#:#:#:#' and port 6379 in rcsb/app/config/config.yml.
KvRedis.py should resemble

self.kV = redis.Redis(host='1.2.3.4', port=6379, decode_responses=True)


Remote Redis requires changing the config file settings on the machine with Redis
From root
vim /etc/redis/redis.conf
(comment out the 'bind' statement)
(change 'protected-mode' from 'yes' to 'no')

Then start Redis and add the config file as a parameter
/usr/bin/redis-server /etc/redis/redis.conf

Redis in Docker
If the file access API is running in Docker, then Redis must also run in Docker.
Redis is run from a separate Docker container.
Download Redis image and start container
docker run --name redis-container -d redis
or (if connecting remotely to Redis container on different server)
docker run --name redis-container -p 6379:6379 -d redis

If the Redis container runs on the same machine as the files API, change Redis host to 'redis' in rcsb/app/config/config.yml.
KvRedis.py should resemble

self.kV = redis.Redis(host='redis', port=6379, decode_responses=True)


Or, if connecting remotely to Redis container on different server, change Redis host to '#:#:#:#' and port 6379 in rcsb/app/config/config.yml.
KvRedis.py should resemble

self.kV = redis.Redis(host='1.2.3.4', port=6379, decode_responses=True)


To view Redis variables

docker run -it --name redis-viewer --link redis-container:redis --rm redis redis-cli -h redis -p 6379
KEYS *
exit


To remove all variables

docker run -it --name redis-viewer --link redis-container:redis --rm redis redis-cli -h redis -p 6379
FLUSHALL
exit


Docker
Build Docker Container
In directory that contains Dockerfile.stage:

docker build -t fileapp -f Dockerfile.stage .


Run docker container

# port number should match port in config.yml

docker run --name fileapp -p 80:80 fileapp

or, if also running a Redis container on the same machine

docker run --name fileapp -p 80:80 --link redis-container:redis fileapp

or, if mounting folders, change paths in rcsb/app/config/config.yml (SESSION_DIR_PATH, REPOSITORY_DIR_PATH, SHARED_LOCK_PATH), enable full permissions for target folder, then

docker run --mount type=bind,source=/path/to/file/system,target=/path/to/file/system --name fileapp -p 80:80 fileapp

or, if also linking to redis container running on same server

docker run --mount type=bind,source=/path/to/file/system,target=/path/to/file/system --name fileapp -p 80:80 --link redis-container:redis fileapp

(observe that the link attribute is not necessary for connecting to Redis running in a container on a different server)


-d runs container in the background (for production)
–-rm removes the container after it is stopped (only for development testing)
–-name allows user to choose a name for the container
-p allows user to choose a port, which should match the port in config.yml
--link connects to a Redis container if the container is running on the same machine as the files API
Error handling
For production, a cron job should be run periodically to remove lingering hidden files from the deposit or archive directories and remove Redis or Sqlite sessions.
An example cron script is in the deploy folder.
After development testing with a Sqlite database, open the kv.sqlite file and delete the tables, and delete hidden files from the deposit or archives directories.
After development testing with Redis, open the redis-cli and delete the variables, and delete hidden files from the deposit or archives directories.