GitLocker: The Coding Marketplace

Description:

adhan

Adhan Dart / Flutter #

Adhan Dart is a well tested and well documented library for calculating Islamic prayer times. Adhan Dart is written to
be compatible with Dart and Dart Native / Flutter / Android / iOS / Web etc... devices of all api versions. It has a
small method overhead, and has no external dependencies.
All astronomical calculations are high precision equations directly from the
book “Astronomical Algorithms” by Jean Meeus. This book is recommended by the
Astronomical Applications Department of the U.S. Naval Observatory and the Earth System Research Laboratory of the
National Oceanic and Atmospheric Administration.
Implementations of Adhan in other languages can be found in the parent repo Adhan
.
Usage #
A simple usage example:
import 'package:adhan/adhan.dart';

main() {
print('My Prayer Times');
final myCoordinates = Coordinates(23.9088, 89.1220); // Replace with your own location lat, lng.
final params = CalculationMethod.karachi.getParameters();
params.madhab = Madhab.hanafi;
final prayerTimes = PrayerTimes.today(myCoordinates, params);

print("---Today's Prayer Times in Your Local Timezone(${prayerTimes.fajr.timeZoneName})---");
print(DateFormat.jm().format(prayerTimes.fajr));
print(DateFormat.jm().format(prayerTimes.sunrise));
print(DateFormat.jm().format(prayerTimes.dhuhr));
print(DateFormat.jm().format(prayerTimes.asr));
print(DateFormat.jm().format(prayerTimes.maghrib));
print(DateFormat.jm().format(prayerTimes.isha));

print('---');

// Custom Timezone Usage. (Most of you won't need this).
print('NewYork Prayer Times');
final newYork = Coordinates(35.7750, -78.6336);
final nyUtcOffset = Duration(hours: -4);
final nyDate = DateComponents(2015, 7, 12);
final nyParams = CalculationMethod.north_america.getParameters();
nyParams.madhab = Madhab.hanafi;
final nyPrayerTimes = PrayerTimes(newYork, nyDate, nyParams, utcOffset: nyUtcOffset);

print(nyPrayerTimes.fajr.timeZoneName);
print(DateFormat.jm().format(nyPrayerTimes.fajr));
print(DateFormat.jm().format(nyPrayerTimes.sunrise));
print(DateFormat.jm().format(nyPrayerTimes.dhuhr));
print(DateFormat.jm().format(nyPrayerTimes.asr));
print(DateFormat.jm().format(nyPrayerTimes.maghrib));
print(DateFormat.jm().format(nyPrayerTimes.isha));
}
copied to clipboard
See Flutter Example Folder for Flutter Usage Example with Dynamic Location From GPS.
also, you can run pub run adhan to test quickly based on Hanafi, Karachi parameters.
*alternatively, without installing in project, you can run pub global activate adhan and then run pub global run adhan to test quickly.
Initialization parameters #
Coordinates
Create a Coordinates object with the latitude and longitude for the location you want prayer times for.
final coordinates = new Coordinates(35.78056, -78.6389);

/// Coordinates Validation Support [Optional],
/// to Support validation, use [validate: true] param, default: false

final validateTrue = new Coordinates(91.78056, -78.6389, validate: true); // Invalid Coordinates, will throw ArgumentError

final validateFalse = new Coordinates(91.78056, -78.6389, validate: false); // Invalid Coordinates, won't throw ArgumentError
copied to clipboard
Date
The date parameter passed in should be an instance of the DateComponents object. The year, month, and day values need to be populated. All other values will be ignored. The year, month and day values should be for the local date that you want prayer times for. These date values are expected to be for the Gregorian calendar. There's also a convenience method for converting a DateTime to DateComponents.
final date = DateComponents(2015, 11, 1);
// or
final date = DateComponents.from(DateTime.now());
copied to clipboard
Calculation parameters
The rest of the needed information is contained within the CalculationParameters class. Instead of manually initializing this class, it is recommended to use one of the pre-populated instances in the CalculationMethod class. You can then further customize the calculation parameters if needed.
final params = CalculationMethod.muslim_world_league.getParameters();
params.madhab = Madhab.hanafi;
params.adjustments.fajr = 2;
copied to clipboard

Parameter
Description

method
CalculationMethod name

fajrAngle
Angle of the sun used to calculate Fajr

maghribAngle
The angle of the sun used to calculate Maghrib

ishaAngle
Angle of the sun used to calculate Isha

ishaInterval
Minutes after Maghrib (if set, the time for Isha will be Maghrib plus ishaInterval)

madhab
Value from the Madhab object, used to calculate Asr

highLatitudeRule
Value from the HighLatitudeRule object, used to set a minimum time for Fajr and a max time for Isha

adjustments
PrayerAdjustments object with custom prayer time adjustments in minutes for each prayer time

CalculationMethod

Value
Description

muslim_world_league
Muslim World League. Fajr angle: 18, Isha angle: 17

egyptian
Egyptian General Authority of Survey. Fajr angle: 19.5, Isha angle: 17.5

karachi
University of Islamic Sciences, Karachi. Fajr angle: 18, Isha angle: 18

umm_al_qura
Umm al-Qura University, Makkah. Fajr angle: 18, Isha interval: 90. Note: you should add a +30 minute custom adjustment for Isha during Ramadan.

dubai
Method used in UAE. Fajr and Isha angles of 18.2 degrees.

qatar
Modified version of Umm al-Qura used in Qatar. Fajr angle: 18, Isha interval: 90.

kuwait
Method used by the country of Kuwait. Fajr angle: 18, Isha angle: 17.5

moonsighting_committee
Moonsighting Committee. Fajr angle: 18, Isha angle: 18. Also uses seasonal adjustment values.

singapore
Method used by Singapore. Fajr angle: 20, Isha angle: 18.

north_america
Referred to as the ISNA method. This method is included for completeness but is not recommended. Fajr angle: 15, Isha angle: 15

turkey
Turkey. Fajr angle: 18, Isha angle: 17

tehran
Tehran. Fajr angle: 17.7, Isha angle: 14, Maghrib Angle: 4.5

other
Fajr angle: 0, Isha angle: 0. This is the default value for method when initializing a CalculationParameters object.

Madhab

Value
Description

shafi
Earlier Asr time

hanafi
Later Asr time

HighLatitudeRule

Value
Description

middle_of_the_night
Fajr will never be earlier than the middle of the night and Isha will never be later than the middle of the night

seventh_of_the_night
Fajr will never be earlier than the beginning of the last seventh of the night and Isha will never be later than the end of the first seventh of the night

twilight_angle
Similar to SEVENTH_OF_THE_NIGHT, but instead of 1/7, the fraction of the night used is fajrAngle/60 and ishaAngle/60

Prayer Times #
Once the PrayerTimes object has been initialized it will contain values for all five prayer times and the time for sunrise. The prayer times will be DateTime object instances initialized with Local values (converted from UTC via .toLocal method). To display these times for a different timezone than local a UTC Offset should be used, for example Duration.
final kushtiaUtcOffset = Duration(hours: 6);
final newYorkUtcOffset = Duration(hours: -4);
// then pass your offset to PrayerTimes like this:
final prayerTimes = PrayerTimes(coordinates, date, params, utcOffset: newYorkUtcOffset);
copied to clipboard
Methods

name
return

timeForPrayer
DateTime instance

currentPrayer
Prayer enum instance

currentPrayerByDateTime
Prayer enum instance

nextPrayer
Prayer enum instance

nextPrayerByDateTime
Prayer enum instance

Sunnah Times #
final prayerTimes = PrayerTimes(coordinates, date, params, utcOffset: newYorkUtcOffset);
final sunnahTimes = SunnahTimes(prayerTimes);
// and then access
/// The midpoint between Maghrib and Fajr
sunnahTimes.middleOfTheNight
/// The beginning of the last third of the period between Maghrib and Fajr,
/// a recommended time to perform Qiyam
sunnahTimes.lastThirdOfTheNight
copied to clipboard
Qibla #
final qibla = Qibla(coordinates);
/// Qibla direction degree (Compass/Clockwise)
qibla.direction
copied to clipboard
Features and bugs #
Please file feature requests and bugs at the issue tracker.
Inspired / Adopted From #

adhan-java

Adhan Java #
Adhan Java is a well tested and well documented library for calculating Islamic prayer times. Adhan Java is written to be compatible with Java and Android devices of all api versions. It compiles against Java 7 to ensure compatibility with Android. It has a small method overhead, and has no external dependencies.
All astronomical calculations are high precision equations directly from the book “Astronomical Algorithms” by Jean Meeus. This book is recommended by the Astronomical Applications Department of the U.S. Naval Observatory and the Earth System Research Laboratory of the National Oceanic and Atmospheric Administration.
Implementations of Adhan in other languages can be found in the Adhan repo.