ambibulb 0.0.51

Description:

ambibulb 0.0.51

AMBIBULB
Ambibulb attempts to provide the similar experience to Ambilight® (Philips TV's feature that projects color onto the wall behind a TV) using Raspberry PI and an IR remote controlled LED light bulb. Please watch the demo.
ambibulb controls the color of RC lights based on the dominant color of an image on your screen. This can enhance your viewing experience or just make your party more colorful 🌈.
HARDWARE

Raspberry PI (tested on 3B+)
HDMI output (TV, projector, display)
RGBW LED light bulb with IR remote control (currently supported model: OSRAM LED STAR+)
IR transmitter (tested on KY-005)
IR receiver(tested on KY-022, optional)
wiring

SOFTWARE DEPENDENCIES

Raspberry Pi OS (10 buster, or any other RPI compatible OS)
LIRC (Linux Infrared Remote Control)

SETUP AND INSTALLATION

Install Raspberry PI OS on your SD card
Install lirc on your RPI:

$ apt install lirc


Configure lirc, connect and configure IR transmitter, guideline
Install ambibulb. There are 2 ways, either build, install and configure locally:

$ wget https://github.com/bespsm/ambibulb/archive/main.zip
$ unzip main.zip
$ cd ambibulb-main
$ make install
$ make configure

or using pip (recommended in venv) and configure locally:
$ python3 -m pip install ambibulb
$ wget https://github.com/bespsm/ambibulb/archive/main.zip
$ unzip main.zip
$ cd ambibulb-main
$ make configure

COMMANDS
Start ambibulb service:
$ systemctl --user start ambibulb.service

Stop ambibulb service:
$ systemctl --user stop ambibulb.service

Check ambibulb service current status, two options:
$ systemctl --user status ambibulb.service
$ journalctl -f

Configure/change the settings of ambibulb service:
$ ambibulb-config