0 purchases
Description:
BotballKit 1.0
BotballKit
An object-oriented wrapper for the KIPR library
Why
The KIPR library is bad in many ways. First of all, it's not even a real Python library, it's just a rushed implementation of its C library.
This is how you import it:
kipr = ctypes.CDLL('/usr/lib/libkipr.so')
Okay, so it's technically not a pure Python library, but it still looks like one, right?
kipr = ctypes.CDLL('/usr/lib/libkipr.so')
status = kipr.digital(0)
print(status)
kipr.motor(0, 100)
kipr.motor(1, 100)
kipr.msleep(2000)
No. This looks like a C library, because that's all it is. It's barely object-oriented and the names of the functions are inconsistent and not Pythonic.
The Solution
The solution to this is a nice, object-oriented wrapper for the official KIPR library. Here's an example that sees if a push sensor is being pressed.
from BotballKit import Bot, Sensor, SensorType
bot = Bot()
sensor = Sensor(bot, SensorType.DIGITAL, 0)
left_motor = Motor(bot, 0)
right_motor = Motor(bot, 1)
status = sensor.status()
print(status)
left_motor.move_async(100, 2)
right_motor.move(100, 2)
Much better, right? You create a bot object, a sensor object, two motor objects for each wheel, then you simply get the status of the sensor and print it and move the bot forward for two seconds.
But It's Longer
While in this example the code is longer than the same example with the official library, as you keep adding on to this program the code will be shorter.
Also having an object-oriented library with much more consistent method names can make it easier to remember and harder to make mistakes.
Documentation
Creating a Bot
The first step to using this library is to create a Bot object. Doing that is as simple as:
from BotballKit import Bot
bot = Bot()
Now we have a Bot object stored in the bot variable.
The Bot constructor can optionally take these parameters:
wait_for_port: Optional[int] = None: Waits for a sensor on the specified port to be True before starting anything else. This will block the thread until the condition is met.
time_limit: Optional[float] = None: Stops the program after the specified number of seconds.
Bot objects also have these methods:
Bot.stop_all_motors(): Stops all motors associated with the bot.
Bot.enable_all_servos(): Enables all servos associated with the bot.
Bot.disable_all_servos(): Disables all servos associated with the bot.
Sensors
Creating Sensor objects is also very simple:
from BotballKit import Sensor, SensorType
sensor = Sensor(bot, SensorType.DIGITAL, 0)
The Sensor constructor must have these parameters:
bot: Bot: Your bot object.
type: SensorType: The type of sensor you want to use. The two options are SensorType.DIGITAL and SensorType.ANALOG.
port: int: The port your sensor is physically connected to.
It has this method available:
Sensor.status() -> Union[bool, int]: Gets the status of the sensor. If the sensor is digital, it will return a bool. If the sensor is analog, it will return an int.
Motors
To create a Motor, all you have to do is:
from BotballKit import Motor
motor = Motor(bot, 0)
The Motor constructor requires these parameters be passed:
bot: Bot: Your bot object.
port: int: The port your motor is physically connected to.
They have these methods available:
Motor.stop(): Stops the motor.
Motor.move(power: int, seconds: float): Moves the motor with the specified power between -100 and 100 for the specified amount of seconds.
Motor.move_async(power: int, seconds: float): Does the same thing as the Motor.move method except it runs asynchronously.
Servos
Creating servos is also easy:
from BotballKit import Servo
servo = Servo(bot, 0)
servo.enable()
All servos need to be enabled to work. This can be done with the Servo.enable method or the Bot.enable_all_servos method.
Its constructor takes the following parameters:
Servo.enable(default_position: Optional[int] = None): Enables the servo. If the default_position parameter is specified, the servo will be set to that position when enabled.
Servo.disable(default_position: Optional[int] = None): Disables the servo. If the default_position parameter is specified, the servo will be set to that position when disabled.
Servo.is_enabled() -> bool: Returns whether the servo is enabled or not.
Servo.toggle(default_position: Optional[int] = None): Toggles the servo. If the default_position parameter is specified, the servo will be set to that position when toggled.
Servo.position(position: Optional[int] = None) -> Optional[int]: Gets or sets the position of the servo. If no parameters are specified, it will return the current position as an int. If the position parameter is specified, it will set the servo position to that value and return None.
License
For personal and professional use. You cannot resell or redistribute these repositories in their original state.
Files In This Product:
Customer Reviews
There are no reviews.
