ftdi-rf 0.9.7

Description:

ftdirf 0.9.7

ftdi-rf
Introduction
Python module for sending and receiving 433/315MHz LPD/SRD signals with generic low-cost GPIO RF modules on a Generic PC.
Protocol and base logic ported ported from rc-switch_.
Supported hardware
Most generic 433/315MHz capable modules (cost: ~2€) connected via ftdi serial compatible hardware to a Generic PC.
.. figure:: http://i.imgur.com/vG89UP9.jpg
:alt: 433modules
Compatibility
Generic RF outlets and most 433/315MHz switches (cost: ~15€/3pcs).
.. figure:: http://i.imgur.com/WVRxvWe.jpg
:alt: rfoutlet
Chipsets:

SC5262 / SC5272
HX2262 / HX2272
PT2262 / PT2272
EV1527 / RT1527 / FP1527 / HS1527

For a full list of compatible devices and chipsets see the rc-switch Wiki_
Dependencies
::
pyftdi

Installation
On your PC, install the ftdi_rf module via pip.
Python 3::
# apt-get install python3-pip
# pip3 install ftdi-rf

Wiring diagram (example)
FT232RL or other supported ftdi serial hardware::
TX:
GND > (GND)
VCC > (5V)
DATA > RX (GPIO1), Or other pin of your liking)

RX:
VCC > (5V)
DATA > TX (GPIO0), Or other pin of your liking
GND > (GND)

Usage
See scripts_ (ftdi-rf_send, ftdi-rf_receive) which are also shipped as cmdline tools.
Open Source

The code is licensed under the BSD Licence_
The project source code is hosted on GitHub_
Please use GitHub issues_ to submit bugs and report issues

.. _rc-switch: https://github.com/sui77/rc-switch
.. _rc-switch Wiki: https://github.com/sui77/rc-switch/wiki
.. _BSD Licence: http://www.linfo.org/bsdlicense.html
.. _GitHub: https://github.com/dpolitis/ftdi-rf
.. _GitHub issues: https://github.com/dpolitis/ftdi-rf/issues
.. _scripts: https://github.com/dpolitis/ftdi-rf/blob/master/scripts
.. _ftdi-rf_send: https://github.com/dpolitis/ftdi-rf/blob/master/scripts/ftdi-rf_send
.. _ftdi-rf_receive: https://github.com/dpolitis/ftdi-rf/blob/master/scripts/ftdi-rf_receive