rancidcmd 0.1.12

Description:

rancidcmd 0.1.12

Rancidcmd is a utility tool for network operators.
This module is wrapper of RANCID login commands.(like cloing, jlogin …)
So if you use this module, then you have to install RANCID in some way.
Why did I make this module? I wanted to do using without password of “.cloginrc”.
This Rancidcmd makes temporary “.clgoinrc” from python code with each excecution.
If already “.clgoinrc” is present, use “.clgoinrc” with priority.




Requirements

Python 2.7, 3.4, 3.5, PyPy



Installation

Please install the RANCID in advance.

For CentOS
$ yum install rancid
For Debian, Ubuntu
$ apt-get install rancid
For MacOS X(Port)
$ port install rancid


After RANCID, please install Rancidcmd
$ pip install rancidcmd

or

$ git clone https://github.com/mtoshi/rancidcmd
$ cd rancidcmd
$ sudo python setup.py install




Care of “~/.cloginrc” existence is not necessary.
If executed user doesn’t have “~/.cloginrc”, then Rancidcmd makes temporary “.cloginrc”.
If already “.clgoinrc” is present, use “.clgoinrc” with priority.






Using example
Example for cisco(clogin).
>>> from rancidcmd import RancidCmd
>>> rancidcmd = RancidCmd(login='/usr/libexec/rancid/clogin',
... user='username',
... password='xxxx',
... enable_password='xxxx',
... address='192.168.1.1')
>>> rancidcmd.execute("show version")
Example for junos(jlogin).
>>> from rancidcmd import RancidCmd
>>> rancidcmd = RancidCmd(login='/usr/libexec/rancid/jlogin',
... user='username',
... password='xxxx',
... address='192.168.1.2')
>>> rancidcmd.execute("show version")
Example for Option (“-d” is enable debug mode and “-t 45” is timeout 45 seconds.).
>>> from rancidcmd import RancidCmd
>>> rancidcmd = RancidCmd(login='/usr/libexec/rancid/jlogin',
... user='username',
... password='xxxx',
... option='-d -t 45',
... address='192.168.1.2')
>>> rancidcmd.execute("show version")
Example for command confirmation (you can use “show” method).
>>> rancidcmd.show("show version")
/usr/libexec/rancid/clogin -u "username" -p "xxxx" -e "xxxx" -c "show version" 192.168.1.1

# This show method will be useful for debug by hands.
RancidCmd() init args.
login (str): Login command is xlogin. (such as "clogin, jlogin")
address (str): Host name or ip address.
user (str): Login user name.
password (str): Login user password.
enable_password (str): Login user enable password.
Default is None.(**clogin is must.**)
option (str): Option is not must.
Deafult is None.
If you set this value to pass directly to clogin.
encoding (str): Encoding type.
Default is 'utf-8'.
Output format.
{'rtn_code': int, 'std_err': str, 'std_out': str}
Output sucess sample.
{'rtn_code': 0,
'std_err': '',
'std_out': '... Copyright (c) 2002-2013, Cisco Systems, Inc. All ...'}
Output error sample. (Not found “clogin”)
{'rtn_code': 1,
'std_err': '/bin/sh: clogin: command not fond\n',
'std_out': ''}
Please see sample code.

https://github.com/mtoshi/rancidcmd/blob/master/samples/sample.py

If you want to use another settings(prompt, method, etc), please edit “.cloginrc” same with previus.
Recently almost network devices can use ssh login. If you use ssh to priority, then you should write below into “.cloginrc”.
# All targets first action is ssh.
add method * ssh telnet

or

# For specific targets.
add method 192.168.1.* ssh telnet


See also

http://www.shrubbery.net/rancid/