stacked_services

Description:

stacked services

Stacked Services #
Provides some essential services to aid in implementing the Stacked architecture. These services are only here to reduce boilerplate code for the users of the Stacked Architecture that uses the architecture as instructed by FilledStacks on the architecture series.
Git Conventional Commits #
Since version 1.0.1 we will try to stick with Conventional Commits specification.
Migration from 0.5.x -> 0.6.x #

The custom builder function has changed for the DialogService instead of using registerCustomDialogBuilder you should now create a map of builders and pass it to registerCustomDialogBuilders.
If you're still using registerCustomDialogBuilder the builder function now takes a third argument of type Function(DialogResponse) that you can call completer.

Old way:
service.registerCustomDialogBuilder(variant: Dialog.basic, builder: (context, request) => Dialog(...))
copied to clipboard
New way:
service.registerCustomDialogBuilder(variant: Dialog.basic, builder: (context, request, completer) => Dialog(...))
copied to clipboard
Take note of the third parameter in the builder function that you can call to complete the builder instead of using the dialog service directly. You can simply call
completer(DialogResponse(...));
copied to clipboard
Services #
The following services are included in the package

NavigationService: Makes use of the Get package to expose basic navigation functionalities
DialogService: Makes use of the Get package to expose functionality that allows the dev to show dialogs from the ViewModels
SnackbarService: Makes use of the Get to expose the snack bar functionality to devs.
BottomSheetService: Makes use of the Get to expose the bottom sheet functionality.

The services can be registered with get_it normally as you would usually
final locator = GetIt.instance;

locator.registerLazySingleton(() => NavigationService());
copied to clipboard
If you're using Injectable as recommended you can register the services using a third party services module. Create a new file in your services folder called thirdparty_services_module.dart.
@module
abstract class ThirdPartyServicesModule {
@lazySingleton
NavigationService get navigationService;
@lazySingleton
DialogService get dialogService;
@lazySingleton
SnackbarService get snackBarService;
@lazySingleton
BottomSheetService get bottomSheetService;
}
copied to clipboard
If you now run
flutter pub run build_runner build
copied to clipboard
Your services will be available as usual on your locator instance.
Usage #
To use ANY OF the services you have to assign the navigation key to your Flutter application.
MaterialApp(
title: 'Stacked Services',
navigatorKey: StackedService.navigatorKey,
// home: AddCardView(), // Used when testing a view
initialRoute: Routes.startupViewRoute,
onGenerateRoute: StackedRouter().onGenerateRoute,
);
copied to clipboard
If you're only using the DialogService it also exposes the navigation key. You only have to set the key for one of the services and it'll work for all the other services. If you set the nav key using the navigation service you don't have to set it for the DialogService and vice versa.
Dialog Service #
The DialogService will show a platform-specific dialog by default. You can change this by passing in dialogPlatform to your show dialog call.
await _dialogService.showDialog(
title: 'Test Dialog Title',
description: 'Test Dialog Description',
dialogPlatform: DialogPlatform.Cupertino,
);
copied to clipboard
Custom Dialog UI #
In addition to platform-specific UI, you can also build a custom dialog. To do that we'll do the following. Start by creating an enum called DialogType.
/// The type of dialog to show
enum DialogType { basic, form }
copied to clipboard
In your UI folder or shared folder under UI, if you have one, create a new file called setup_dialog_ui.dart. Inside you will create a new function called setupDialogUi. In there you will create a Map of builders that will map to the enum values you created above. To keep code maintenance to the highest level you should make each of the widgets into its own widget and construct that instead of building the UI inline.
void setupDialogUi() {
final dialogService = locator<DialogService>();

final builders = {
DialogType.basic: (context, sheetRequest, completer) =>
_BasicDialog(request: sheetRequest, completer: completer),
DialogType.form: (context, sheetRequest, completer) =>
_FormDialog(request: sheetRequest, completer: completer),
};

dialogService.registerCustomDialogBuilders(builders);
}

class _BasicDialog extends StatelessWidget {
final DialogRequest request;
final Function(DialogResponse) completer;
const _BasicDialog({Key? key, this.request, this.completer}) : super(key: key);

@override
Widget build(BuildContext context) {
return Dialog(
child: /* Build your dialog UI here */
);
}
}

class _FormDialog extends StatelessWidget {
final DialogRequest request;
final Function(DialogResponse) completer;
const _FormDialog({Key? key, this.request, this.completer}) : super(key: key);

@override
Widget build(BuildContext context) {
return Dialog(
child: /* Build your dialog UI here */
);
}
}

copied to clipboard
The DialogRequest has a few properties that can make you easily decide which widgets to place in the dialog to show. All these properties can be passed directly to the showCustomDialog function. Here are all the properties available for you to use.
/// The title for the dialog
final String title;

/// Text so show in the dialog body
final String description;

/// Indicates if an image should be used or not
final bool hasImage;

/// The URL / path to the image to show
final String imageUrl;

/// The text shown in the main button
final String mainButtonTitle;

/// A bool to indicate if you should show an icon in the main button
final bool showIconInMainButton;

/// The text to show on the secondary button on the dialog (cancel usually)
final String secondaryButtonTitle;

/// Indicates if you should show an icon in the main button
final bool showIconInSecondaryButton;

/// The text shown on the third button on the dialog
final String additionalButtonTitle;

/// Indicates if you should show an icon in the additional button
final bool showIconInAdditionalButton;

/// Indicates if the dialog takes input
final bool takesInput;

/// Intended to be used with enums. If you want to create multiple different
/// dialogs. Pass your enum in here and check the value in the builder
final dynamic variant;

/// Extra data to be passed to the UI
final dynamic customData;
copied to clipboard
Setup and usage #
After you have created your register function go to your main.dart file and after you've registered your services with the locator call setupDialogUi.
void main() {
await setupLocator();
setupDialogUi();
runApp(MyApp());
}
copied to clipboard
Now in your ViewModels, you can make use of the dialog as follows.
await _dialogService.showCustomDialog(
variant: DialogType.base, // Which builder you'd like to call that was assigned in the builders function above.
title: 'This is a custom UI with Text as main button',
description: 'Sheck out the builder in the dialog_ui_register.dart file',
mainButtonTitle: 'Ok',
);
copied to clipboard
Returning Data from Custom Dialog #
The builder function supplied for a Custom dialog builder has a parameter of type Function(DialogResponse) as the last parameter. Calling the completer function and passing in a DialogResponse object will return it to the caller that's awaiting on the dialog response UI. So when you have a tap handler in your dialog and you want to close the dialog, use the completer(DialogResponse()) function.
var response = await _dialogService.showCustomDialog(
variant: DialogType.form,
title: 'My custom dialog',
description: 'This is my dialog description',
mainButtonTitle: 'Confirm',
);

if(response.confirmed) {
// Do some confirmation action here.
}
copied to clipboard
Navigation Service #
The NavigationService will allow you to navigate your app easily from the ViewModel. No need for BuildContext.

NOTE: The table below expects you to have followed above steps, and intialized NavigationService like this: final NavigationService _navigationService = locator<NavigationService>();
The table below shows each function you can use with its return type and description:




Function
Return Type
Description




config
void
Allows you to configure the default behaviour for navigation.


navigateWithTransition
Future<dynamic>
Pushes page onto the navigation stack. This uses the page itself Widget instead of routeName String


replaceWithTransition
Future<dynamic>
Replaces current view in the navigation stack. This uses the page itself Widget instead of routeName String


back
bool
Pops the current scope and indicates if you can pop again


popUntil
void
Pops the back stack until the predicate is satisfied


popRepeated
void
Pops the back stack the number of times you indicate with popTimes


navigateTo
Future<dynamic>
Pushes routeName onto the navigation stack


navigateToView
Future<dynamic>
Pushes view onto the navigation stack


replaceWith
Future<dynamic>
Replaces the current route with the routeName


clearStackAndShow
Future<dynamic>
Clears the entire back stack and shows routeName


clearTillFirstAndShow
Future<dynamic>
Pops the navigation stack until there's 1 view left then pushes routeName onto the stack


clearTillFirstAndShowView
Future<dynamic>
Pops the navigation stack until there's 1 view left then pushes view onto the stack


pushNamedAndRemoveUntil
Future<dynamic>
Push route and clear stack until predicate is satisfied








Route observation #
If you want the current route to be set during navigations then you have to add a route observer.
class MyApp extends StatelessWidget {
@override
Widget build(BuildContext context) {
return MaterialApp(
title: 'Stacked Services Demo',
theme: ThemeData(
primarySwatch: Colors.blue,
),
navigatorObservers: [StackedService.routeObserver], ///<- Here
navigatorKey: StackedService.navigatorKey,
initialRoute: Routes.homeScreenRoute,
onGenerateRoute: StackedRouter().onGenerateRoute,
);
}
}
copied to clipboard
Snackbar Service #
The SnackbarService allows you to show a snack bar from the ViewModel. Logic and state is handled in the ViewModel this is where you know something went wrong, a results is unexpected or when a user has completed an action. Instead of routing the action back to the UI to show a snackbar using the context we can show it directly from the ViewModel using the SnackbarService.
Basic Usage #
To use the service is quite easy. Here is an example of how you'd show a snackbar.
_snackbarService.showSnackbar(
message: 'This is a snack bar',
title: 'The title',
duration: Duration(seconds: 2),
onTap: (_) {
print('snackbar tapped');
},
mainButtonTitle: 'Undo',
onMainButtonTapped: () => print('Undo the action!'),
);
copied to clipboard
This will show a default Snackbar styled with the background set as Dark grey and the text as white. There will be a main button on the right that will fire the function and print 'Undo the action!' when it's tapped.
Styling the Snackbar #
To supply a style for the showSnackbar function you have to supply a SnackbarConfig. Create a new file in your ui folder called setup_snackbar_ui.dart. Inside create a function that will register your snackbarConfig. We will register a config that makes the background red, text white and the main button title black.
void setupSnackbarUi() {
final service = locator<SnackbarService>();

// Registers a config to be used when calling showSnackbar
service.registerSnackbarConfig(SnackbarConfig(
backgroundColor: Colors.red,
textColor: Colors.white,
mainButtonTextColor: Colors.black,
));
}
copied to clipboard
Then in the main.dart file before running the app, after setting up the locator we call setupSnackbarUi.
void main() {
await setupLocator();
setupSnackbarUi();
runApp(MyApp());
}
copied to clipboard
If you now execute the same showSnackbar function as above you'll see the background is red, text white and the action button has black text.
Custom Styles #
Sometimes you might want more than 1 snackbar style. In this case you can register multiple SnackbarConfigs to be shown using the showCustomSnackBar function. To register a custom config we need to define unique values to register it again that's easy to reference when we want to show the snackbar using that config. I like to use enums. We'll start by creating an enum called SnackbarType.
/// The type of snackbar to show
enum SnackbarType { blueAndYellow, greenAndRed }
copied to clipboard
Then open up the setup_snackbar_ui.dart created above and we'll add the configs for the two enums.
void setupSnackbarUi() {
final service = locator<SnackbarService>();

service.registerCustomSnackbarConfig(
variant: SnackbarType.blueAndYellow,
config: SnackbarConfig(
backgroundColor: Colors.blueAccent,
textColor: Colors.yellow,
borderRadius: 1,
dismissDirection: SnackDismissDirection.HORIZONTAL,
),
);

service.registerCustomSnackbarConfig(
variant: SnackbarType.greenAndRed,
config: SnackbarConfig(
backgroundColor: Colors.white,
titleColor: Colors.green,
messageColor: Colors.red,
borderRadius: 1,
),
);
}
copied to clipboard
Now you can call showCustomSnackBar and pass in the variant enum that you'd like to use. The following code will show the blueAndYellow snackbar.
_snackbarService.showCustomSnackBar(
variant: SnackbarType.blueAndYellow,
message: 'Blue and yellow',
title: 'The message is the message',
duration: Duration(seconds: 2),
onTap: (_) {
print('snackbar tapped');
},
mainButtonTitle: 'Undo',
onMainButtonTapped: () => print('Undo the action!'),
);
copied to clipboard
And the following code will show the greenAndRed snackbar
_snackbarService.showCustomSnackBar(
variant: SnackbarType.greenAndRed,
title: 'Green and Red',
message: 'The text is green and red and the background is white',
duration: Duration(seconds: 2),
onTap: (_) {
print('snackbar tapped');
},
mainButtonTitle: 'Undo',
onMainButtonTapped: () => print('Undo the action!'),
);
copied to clipboard
The snackbar service does not cover every scenario at the moment, especially for adding multiple actions or using icons. If you're looking for those kind of features please make an issue or make a PR for the functionality. I would greatly appreciate it.
Auto close snackbar when tapped main button #
To achieve the same behavior just like Flutter's snackbar where the snackbar will close when tapped the action button in the snackbar, you can set closeSnackbarOnMainButtonTapped to true in the SnackbarConfig.
service.registerSnackbarConfig(
SnackbarConfig(
closeSnackbarOnMainButtonTapped: true,
),
);
copied to clipboard
service.registerCustomSnackbarConfig(
variant: SnackbarType.autoCloseMainButtonTapped,
config: SnackbarConfig(
snackPosition: SnackPosition.TOP,
closeSnackbarOnMainButtonTapped: true,
borderRadius: 1,
),
);
copied to clipboard
BottomSheet Service #
This service, similar to the others above, allows the user to show a BottomSheet from the same place they handle their business logic. It's calls that can be awaited on for a result returned by the user. This makes writing your business logic much easier in the long run.
Usage #
The BottomSheetService has a basic mode for quick and dirty bottom sheet functionality, and also has a custom UI building function. To show a basic bottom sheet you simply get the BottomSheetService from the locator and then call showBottomSheet.
final BottomSheetService _bottomSheetService = locator<BottomSheetService>();

var sheetResponse = await _bottomSheetService.showBottomSheet(
title: 'This is my Sheets Title',
description:
'This property will display under the title. We\'re not going to provide a lot of UI versions for the sheet because everyone will have a different style.\nInstead you can use the custom sheet builders as shown below.',
);
copied to clipboard
As you can see above you can get a response from the showBottomSheet call. There are also two additional titles you can pass into the function.
var confirmationResponse =
await _bottomSheetService.showBottomSheet(
title: 'Confirm this action with one of the options below',
description:
'The result from this call will return a SheetResponse object with confirmed set to true. See the logs where we print out the confirmed value for you.',
confirmButtonTitle: 'I confirm',
cancelButtonTitle: 'I DONT confirm',
);

print( 'confirmationResponse confirmed: ${confirmationResponse?.confirmed}');
copied to clipboard
The confirmButtonTitle when tapped will return a response where confirmed is set to true and the cancel title will return a response where confired is set to false.
Custom UI Setup #
Custom UI works the same as the DialogService. You can create a new file in your ui folder called setup_bottom_sheet_ui.dart. Inside this file you'll get the BottomSheetService from the locator (make sure it's registered, check beginning of readme). Then you'll construct a map of builders which take a mapping of an enum to a builder function. The builder function expects a BuildContext, SheetRequest and Function<SheetResponse> which we always call a completer.
void setupBottomSheetUi() {
final bottomSheetService = locator<BottomSheetService>();

final builders = {
BottomSheetType.FloatingBox: (context, sheetRequest, completer) =>
_FloatingBoxBottomSheet(request: sheetRequest, completer: completer)
};

bottomSheetService.setCustomSheetBuilders(builders);
}

class _FloatingBoxBottomSheet extends StatelessWidget {
final SheetRequest request;
final Function(SheetResponse) completer;
const _FloatingBoxBottomSheet({
Key? key,
this.request,
this.completer,
}) : super(key: key);

@override
Widget build(BuildContext context) {
return Container(
margin: EdgeInsets.all(25),
padding: EdgeInsets.all(25),
decoration: BoxDecoration(
color: Colors.white,
borderRadius: BorderRadius.circular(15),
),
child: Column(
...
),
);
}
}
copied to clipboard
Once you've created the builders you set it on the service through setCustomSheetBuilder. Now in your code you can show this specific dialog that you registered.
var confirmationResponse =
await _bottomSheetService.showCustomSheet(
variant: BottomSheetType.FloatingBox,
title: 'This is a floating bottom sheet',
description:
'This sheet is a custom built bottom sheet UI that allows you to show it from any service or viewmodel.',
mainButtonTitle: 'Awesome!',
secondaryButtonTitle: 'This is cool',
);

copied to clipboard
Returning data from the BottomSheet #
When you want to complete the dialog and return some data all your do is call the completer function and pass the SheetResponse that you'd like the awaiting function to receive.
onTap: () => completer(SheetResponse(...))
copied to clipboard