wfdlogger 24.2.19

Creator: bradpython12

Last updated:

0 purchases

wfdlogger 24.2.19 Image
wfdlogger 24.2.19 Images
Add to Cart

Description:

wfdlogger 24.2.19

K6GTE Winter Field Day logger (PyQt5)

Winter Field Day is a once a year 24hr
emergency preparidness event for radio amateurs (Hams). During the event, we try
and make as many radio contacts with other Hams in a 24 hour period. Bonus
points are awarded for operating outside or using alternate power sources, such
as battery/solar/wind. You can find out more about Winter Field Day by visiting
the WFDA. You can find out more about amateur radio
by visiting the ARRL.
The logger is written in Python 3, and uses the PyQT5 lib. Qt5 is cross
platform so it might work on everything. I have tested it on Linux, Rasperry
Pi OS and Windows 10. This code is based off of a logger I had done earlier
using Python and the curses library wich can be found
here and one written for ARRL
Field Day here.
The log is stored in an sqlite3 database file 'WFD.db'. If you need to wipe
everything and start clean, just delete this file and re-run wfdlogger
The logger client will generate a cabrillo for submission, An ADIF file so you
can merge contacts into your normal Log, and a Statistics file with a band mode
breakdown.
The server if used, will generate a group cabrillo file to submit.

Table Of Contents

K6GTE Winter Field Day logger (PyQt5)

Table Of Contents
Caveats
Recent Changes
WB8ERJ's blog writeup
Installing, Updating, Removing Client
Running Client
The Server

Server install
Server Documentation


What to do first
Logging
Features

Radio Polling via flrig or rigctld
Cloudlog, QRZ, HamDB, HamQTH useage
N1MM packets for Node-Red Dashboard
XPlanet marker file
Editing an existing contact
Super Check Partial
Section partial check
DUP checking
Autofill


CW

CW Settings
CW Macros
CW Macros (Run vs S&P)
cwdaemon speed changes and stop sending


When the event is over
Group / Club logging
Server configuration
Client configuration for groups
Chat Window
How to know the server is there
Logging reliability
Generating the cabrillo file
I'm sure there are short cummings



Caveats
WFD only has a generic digital mode designator 'DI', which gets exported to the
cabrillo file. But ADIF and CloudLog needed something else, So I Chose RTTY.
Feel free to change it to what ever you will use. Just search for the two
places in the code 'RTTY' is used and Bob's your dads brother.
Recent Changes

[24.2.19] Fixed the fix for the datetime.utc deprecation. Older Python versions work again.
[24.1.27] Change band/mode when dropdowns are changed. removed some deprecations.
[23.2.3] Added visual cue as to validity of logged class and section.
[23.1.30] Changed Cabrillo tag 'CONTEST' to WFD.
[23.1.28] xplanet markers not generating.
[23.1.27] Fixed order of CW macro buttons.
[23.1.23] Visual tweaks
[23.1.20] UI now resizable.
[23.1.14] Safer access to dict keys.
[23.1.14] Added app icons.
[22.12.28] Repackaged for pypi pip installation.
[22.12.28] Removed use of BeautifulSoup and lxml. Migrated to xmltodict.
[22.12.27] WFDA preferres DG as the mode indicator for digital.
[22.12.16] Changed the RAC sections for 2023. Thanks for the heads up WB8ERJ!
[22.11.12] 2023 scoring and antenna bonus.
[22.10.13] Added N1MM XML status packets. So you can use Kyle AA0Z's Node-Red dashboard.
[22.10.9] Added a group contact aggregation server. So multiple clients can participate in WFD together.

WB8ERJ's blog writeup
Mike's Tech Blog WB8ERJ
Installing, Updating, Removing Client
#install
pip install wfdlogger

#update
pip install -U wfdlogger

#remove
pip uninstall wfdlogger

Running Client
In a terminal type:
wfdlogger

The Server
Server install
pip install wfdserver

Server Documentation
wfdserver
What to do first
On first run, there will be a dialog box asking you for your call class and
section. if you need to change this later, the entry fields can be found at
the bottom of the screen.
If you're participating as a member of a group, do not put your groups/club
call as your call. Enter your own call. The group call will be polled from
the server.

Logging
Okay you've made a contact. Enter the call in the call field. As you type it
in, it will do a super check partial (see below). Press TAB or SPACE to advance
to the next field. Once the call is complete it will do a DUP check (see below).
It will try and Autofill the next fields (see below). When entering the
section, it will do a section partial check (see below). Press the ENTER key
to submit the Q to the log. If it's a busted call or a dup, press the ESC key
to clear all inputs and start again.
Features
Radio Polling via flrig or rigctld
If you run flrig or rigctld on a computer connected to the radio, it can be
polled for band/mode updates automatically. Click the gear icon at the bottom
of the screen to set the IP and port. There is a radio icon at the bottom of
the logging window to indicate polling status.

Cloudlog, QRZ, HamDB, HamQTH useage
If you use either Cloudlog logging or QRZ/HamDB/HamQTH lookup you can click
the gear icon to enter your credentials.
Q's are pushed to CloudLog as soon as they are logged.
The QRZ/HamDB/HamQTH lookup is only used to get the Op name and gridsquare for
the call. Mainly because when a Q is pushed to CloudLog it will not show as a
pin on the map unless it has a gridsquare. So this is a scratch my own itch
feature. HAMDB.org is used by default since it's free. If both are checked it
will it will use QRZ then fallback to HAMDB.
N1MM packets for Node-Red Dashboard
If you wish to use Kyle AA0Z's Node-Red contest dashboard, edit these settings.

XPlanet marker file
If you use QRZ/HamdDB/HamQTH lookups you can also generate an
XPlanet markerfile which will show little
pips on the map as contacts are logged.

The above launched with an example command:
xplanet -body earth -window -longitude -117 -latitude 38 -config Default -projection azmithal -radius 200 -wait 5

Editing an existing contact
Double click a contact in the upper left of the screen to edit or delete it.

Super Check Partial
If you type more than two characters in the callsign field the program will
filter the input through a "Super Check Partial" routine and show you possible
matches to known contesting call signs. Is this useful? Doubt it.

Section partial check
As you type the section abbreviation you are presented with a list of all
possible sections that start with what you have typed.

DUP checking
Once you type a complete callsign and press TAB or SPACE to advance to the
next field. The callsign is checked against previous callsigns in your log.
It will list any prior contact made showing the band and mode of the contact.
If the band and mode are the same as the one you are currently using, the
listing will be highlighted, the screen will flash, a bell will sound to alert
you that this is a DUP. At this point you and the other OP can argue back and
forth about who's wrong. In the end you'll put your big boy pants on and make
a decision if you'll enter the call or not.

Autofill
If you have worked this person before on another band/mode the program will
load the class and section used previously for this call so you will not have
to enter this info again.
CW
CW Settings
Support is provided for both cwdaemon and PyWinkeyer.

Defalt port for cwdaemon is 6789 and for PyWinkeyer is 8000.
CW Macros
The program will check in the current working directory for a file called
cwmacros.txt It will parse the file
and configure the row of 12 buttons along the bottom half of the window.
The macros can be activated by either pressing the corresponding function key,
or by directly clicking on the button. You can check the file to glean it's
structure, but it's pretty straight forward. Each line has 4 sections separated
by the pipe | character.
Here's an example line.
R|F2|Run Exch|{HISCALL} {MYCLASS} {MYSECT}
The first field is an R if the macro is to be shown while in Run mode.
Otherwise an S for Search and Pounce. The second field is the function key
to program. The third is the text label to put in the button. Lastly the
fourth is the text you would like to send.
A limited set of substitution macros are offered.
{MYCALL}
{HISCALL}
{MYCLASS}
{MYSECT}
These are pulled straight from the onscreen input fields. Combined with normal
text this should have you covered for most of your exchange needs.
CW Macros (Run vs S&P)
You can toggle the macros in use between Run and Search and Pounce by clicking
the button to the left of the Generate Logs button at the botton right portion
of the screen.

This can also be used to reload the macros if you edit them while the program
is running.
cwdaemon speed changes and stop sending
If you are using cwedaemon for sending, you can use:
CTRL+Esc to abort sending.
PgUp Increase sending speed.
PgDown Decrease sending speed.
When the event is over
After the big weekend, once you've swept up all the broken beer bottles and
wiped the BBQ sauce off your chin, go ahead and click the Generate Logs button.

This will generate the following:
An ADIF log 'WFD.adi'.
A Cabrillo log 'Yourcall.log'. Which you edit to fill in your address etc. If
your not using Windows, you must ensure whatever editor you use uses CR/LF
line endings. Cause whatever they use at the Winter Field Day society will
choke with out them. To be safe you might want to run it through 'unix2dos'
before submitting it.
A 'Statistics.txt' file which breaks down your band mode usage. Each unique
band/mode combo is a multiplier.
Group / Club logging
I have added a group contact aggrigating server. This can be run on the same
computer as the client program, or on a separate dedicated PC or Raspberry Pi
on the same network.

Server configuration
The configuration file for the server is a JSON file 'server_preferences.json'.
It's generated automatically on the first run of the server wfdserver.
So start the server then press CTRL-C to quit it, then edit the josn file.
{
"ourcall": "W1AW",
"ourclass": "3O",
"oursection": "ORG",
"name": "Hiram Maxim",
"address": "225 Main Street",
"city": "Newington",
"state": "CT",
"postalcode": "06111",
"country": "USA",
"email": "[email protected]",
"bonus": {
"altpower": false,
"outdoors": false,
"notathome": false,
"antenna": false,
"satellite": false
},
"mullticast_group": "224.1.1.1",
"multicast_port": 2239,
"interface_ip": "0.0.0.0",
"node_red_server_ip": "127.0.0.1",
"node_red_server_port": 12062
}

Feel free to leave the last 3 items as they are unless you have good
reason not too. The rest should be straight forward.
Under the bonuses section, if your group qualifies for a bonus, put true next
to the type of bonus.
Client configuration for groups
In the settings dialog there is now a tab labeled 'Group Operation'.

Go ahead and place a check next to 'Connect to server'. Rejoyce and let
merriment be had by all. Be sure and have your callsign already set before
checking this. If you forgot, Uncheck it, set your callsign and then check it.
A couple of things will change on the client when this is done. You will see
that your callsign will disappear and be replaced with your clubs call that the
server reports. The portion of the screen where all the different ARRL sections
are displayed will be replaced by a group chat window and a column showing the
station call, band and mode of other participants.

If more than one operator is on the same band/mode, their names will be
highlighted in the operators list. Feel free to yell at eachother in the chat.

Chat Window
The chat window is pretty straight forward. If someone mentions you in the chat
that line will be highlighted with an accent color. If you find the font size
does not work for you, can adjust the size by: Placing your mouse cursor in the
chat window, then rotate your mouse wheel while holding down the Control key.
There is one command you can type into the chat window that may be of use.
if you type @stats into the window the server will dump out the groups stats
into the chat.
Server:
Band CW PH DG
160 0 0 0
80 0 0 25
40 0 159 0
20 1 162 126
15 0 0 0
10 0 0 0
6 0 17 0
2 0 0 0

Score: 1284
Last Hour: 271
Last 15: 81

Since most people will not be able to see the screen of the server, if it has
one at all. You may find this useful.
How to know the server is there
Most likely, the server will be in some other tent/building/area of the room.
Every 10 seconds or so the server will send out a UDP network packet saying
it's there. As long as your client keeps seeing these packets the group call
indicator at the bottom of the screen will look like:

But if about 30 seconds go by with no update from the server, the indicator
will change to:

Go check on it.
Logging reliability
As mentioned before, We're using UDP traffic to pass data back and forth to the
server. UDP traffic is a 'Fire and forget' method. Akin to a bunch of people
in the same room yelling at eachother. Everyone can hear you, but you don't
know if anyone heard what you said. This has both advantages and disadvantages.
One advantage is that your program is not stuck waiting for a reply or timeout,
locking up your user interface. The disadvantage is you have no idea if anyone
took note of what you had said.
This works fine in a local network since the traffic doesn't have to survive
the trip through the big bad tubes of the internet. That being said, someone
may trip on a cord, unplugging the router/switch/wireless gateway. Or someone
may be trying to use WIFI and they are Soooooo far away you can barely see
their tent. Or worse you have EVERYONE on WIFI, and there are packet collisions
galore degrading your network.
To account for this, the client logging program keeps track of recent packets
sent, noting the time they were sent at. The server after getting a packet,
generates a response to the sender with it's unique identifyer. Once the client
gets the response from the server, it will remove the request on the local side
and print a little message giving you a visual confirmation that the command was
acted upon by the server. If the server does not respond either because the
response was lost or the request never made it to reply too. The client will
resend the packet every 30 seconds until it gets a reply.
But all this may still result in the server not having a copy of your contact.
To account for this, when the "Generate Logs" button is pressed on the client,
the client will resend all the logged contacts that have not gotten responses
from the server. You can keep doing this, if need be, until it gets them all.
There is a visual indicator giving you an idea of how many if any contacts have
not been verified. The Generate Logs button will change serving this purpose.

The client will resend all the unverified contacts to the server as part of
the log generation process.
Chat traffic is best effort. Either everyone sees your plea for more beer or
they don't. No retry is made for chat traffic. Just get your butt up and make
the trip to the cooler.
Generating the cabrillo file
If any of the networked clients presses the 'Generate Logs' button on their
screen, the server will be told to generate it's cabrillo file, it will be
named 'WhatEverYourClubCallIs.log'.
Later you can also launch the server with '-l' flag on the command line
and the server will generate the log and then exit.
I'm sure there are short cummings
It's early days, and I've mainly tested the operations with the client logging
program and several simulated operators, see file in testing/simulant.py.
Real world use for Winter Field Day outside of January is hard to come by. So I'm sure
there are a couple of things I forgot, or didn't account for.
If you are part of a group of linux using Hams, please take this for a spin and
tell me what I missed or could do better. Like a dry run, to make sure I'm not an idiot.

License

For personal and professional use. You cannot resell or redistribute these repositories in their original state.

Files In This Product:

Customer Reviews

There are no reviews.