Description:

yeedart

Yeedart #


Dart library for controlling Yeelight products over LAN.
More info about Yeelight API:

https://www.yeelight.com/en_US/developer
https://www.yeelight.com/download/Yeelight_Inter-Operation_Spec.pdf

Contents #

Installation
Usage

Device discovery
Connect to the device
Main and background light


Flow
Scene
Features and bugs

Installation #

Depend on it

Run this command:
With dart:
$ dart pub add yeedart
copied to clipboard
With flutter:
$ flutter pub add yeedart
copied to clipboard
This will add a line like this to your package's pubspec.yaml (and run an implicit dart pub get/flutter pub get):
dependencies:
yeedart: ^0.3.2
copied to clipboard

Import it

Now in your Dart code, you can use:
import 'package:yeedart/yeedart.dart';
copied to clipboard
Usage #
Device discovery #
First of all, you need to know your device's IP address and port.
You can use Yeelight.discover() method which returns list of DiscoveryResponse.
final responses = await Yeelight.discover();
final response = responses.first; // or filter..
copied to clipboard
Each response contains IP address and port for given device
and other properties (name, firmware version, current state,...).
ℹ️ You can also specify timeout for discovery. Default is 2 seconds.

Note that for device discovery to properly work on Android, you at least need the INTERNET permission granted.

Connect to the device #
final device = Device(
address: InternetAddress("192.168.1.183"),
port: 55443,
);

await device.turnOn(); // turn the device on

// set red color with smooth transition
await device.setRGB(
color: Colors.red,
effect: const Effect.smooth(),
duration: const Duration(milliseconds: 500),
);

await device.setBrightness(brightness: 70); // set brightness to 70 %

device.disconnect(); // always disconnect when you are done!
copied to clipboard
⚠️ When you send a Command, new TCP connection will be created automatically.
This single TCP connection is then used for another command(s). But when you are done,
you should close the connection.
ℹ️ Note that when you call device.disconnect() and then call
for example device.turnOff(), new TCP connection will be created automatically.
ℹ️ If you don't want to send any command and just listen on the notificationMessageStream, use the device.connect() to create a connection manually.
ℹ️ Also note that Yeelight connections are rate-limited to 60 per minute.
Main and background light #
Some devices can be equiped with two lights: main and background. Methods in Device class control main light by default
(for example device.setRGB(color: Colors.red) sets RGB color for main light. If you want to set RGB color for background light, you have to specify lightType parameter: device.setRGB(color: Colors.red, lightType: LightType.backgroud);.
You can also use LightType.both but ONLY for toggling: device.toggle(lightType: LightType.both).
Flow #
Flow (color flow) is basically a list of transitions. To start a flow use startFlow() method and provide Flow. Flow has 3 required parameters:

count - number of transitions to run, 0 for infinite loop. If you have 10 transitions and count is 5, it will run only first 5 transitions!
action - specifies action to take after the flow ends.

FlowAction.stay to stay at the last state when the flow is stopped.
FlowAction.recover to recover the state before the flow.
FlowAction.turnOff to turn off.


transitions - list of FlowTransition, FlowTransition.rgb(), FlowTransition.colorTemperature() or FlowTransition.sleep().

Following example will loop red, green and blue colors at full brightness.
await device.startFlow(
flow: const Flow(
count: 0,
action: FlowAction.recover(),
transitions: [
FlowTransition.rgb(color: 0xff0000, brightness: 100),
FlowTransition.sleep(duration: Duration(milliseconds: 500)),
FlowTransition.rgb(color: 0x00ff00, brightness: 100),
FlowTransition.sleep(duration: Duration(milliseconds: 500)),
FlowTransition.rgb(color: 0x0000ff, brightness: 100),
FlowTransition.sleep(duration: Duration(milliseconds: 500)),
],
),
);
copied to clipboard
To manually stop flow, use device.stopFlow().
This library also includes some predefined flows:

Flow.rgb() - changes color from red, to green to blue
Flow.police - changes red and blue color like police lights.
Flow.pulse() - creates pulse with given color

Scene #
Scene allows you to set light to specific state. To use scene, use setScene() method and provide Scene.
You can use:

Scene.color() or Scene.hsv() to set color and brightness
Scene.colorTemperature to set color temperature and brightness
Scene.colorFlow() to start a color Flow
Scene.autoDelayOff() to turn on the device to specified brightness and start a timer to turn off the light after specified number of minutes.

Example:
device.setScene(scene: Scene.color(color: 0xff0000, brightness: 100));
copied to clipboard
Features and bugs #
Please file feature requests and bugs at the issue tracker.

License

For personal and professional use. You cannot resell or redistribute these repositories in their original state.

Share

• Share on Facebook
• Share on Twitter